Light meter problem Nikkormat FT3 (maybe corroded wires)
10.5 هزار بار بازدید -
6 سال پیش
-
The light meter did not
The light meter did not work in this old Nikkormat FT3 because of a corroded wire and the battery contact.
I I thought it was only bad in one end of the wire, but to my surprise it was also corroded in the other end on the circuit board and that's why there was no connection to the battery or the lighter meter.
Here are some link's to different repair tool's:
Japan Hobby Tool rubber cone:
https://www.amazon.com/Japan-Vacuum-Camera-Opener-Repair/dp/B0013HFYKK/ref=pd_sbs_469_1?_encoding=UTF8&pd_rd_i=B0013HFYKK&pd_rd_r=RKSF5A4YKT9GV3E1382C&pd_rd_w=5H58m&pd_rd_wg=DBny2&psc=1&refRID=RKSF5A4YKT9GV3E1382C
18 different size rubber repair tool's:
https://www.amazon.com/Sizes-Lens-Filter-Wrench-Rubber/dp/B00988D1BK/ref=pd_sbs_469_2?_encoding=UTF8&pd_rd_i=B00988D1BK&pd_rd_r=RKSF5A4YKT9GV3E1382C&pd_rd_w=5H58m&pd_rd_wg=DBny2&psc=1&refRID=RKSF5A4YKT9GV3E1382C
Divider Caliper Wing Compass:
https://www.amazon.co.uk/Divider-Caliper-Compass-Marking-Machinist/dp/B015CN9A8M
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
https://www.amazon.com/dp/B00QRPWCN0/ref=psdc_3347581_t1_B00J5F6O92
JIS cross head screw driver's:
https://www.amazon.com/Moody-Tools-58-0219-Chromium-Screwdriver/dp/B004PGO1T6/ref=pd_sim_421_6?_encoding=UTF8&pd_rd_i=B004PGO1T6&pd_rd_r=775KBDR03D8PMMEZWKFJ&pd_rd_w=ti7yC&pd_rd_wg=s2a40&psc=1&refRID=775KBDR03D8PMMEZWKFJ
Or this set, that is the set I use:
https://eustore.ifixit.com/en/Tools/Drivers-Wrenches/JIS-Driver-Set.html?utm_source=iFixit&utm_campaign=Referral&utm_medium=modal&utm_content=145115
Lens cleaning wipes (PEC-PAD):
https://www.amazon.com/dp/B0161VIZZ8/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0161VIZZ8&pd_rd_wg=ZTxxY&pd_rd_r=RNY8S6Q1V5K18K3F61VZ&pd_rd_w=2c1Oy
6 سال پیش
در تاریخ 1398/01/14 منتشر شده
است.
10,546
بـار بازدید شده