Making The Wolverine Cowl - My Fastest Way To Smooth Out A PLA Print N’stuff
1.2 میلیون بار بازدید -
3 سال پیش
-
#tutorial
#tutorial #3dprinting #propmaking
I’m just a passionate hobbyist, that loves to make Props and other Stuff.
And so I am sharing this build just for the love of all things creative and hope to inspire others into the wonderful world of prop making.
This is my full video “build” of making the Wolverine Cowel. And since a lot of you ask repeatedly how I clean up my 3D printsand especially the print lines on PLA you’ll be glad to know that this video really focuses on that. How to smooth out a 3D PLA print with minimal effort. And since I love sharing my prop making passion so much with you guys, I’ve of course included everything, all the way to the finished display prop.
I’ve actually used talcum powder for mixing my paints, as far back as some 30ish years ago, when I attended art school. So its safe to say the trick has been around a while. And its always fun to look at new ways of using old teqniques with the ever evolving craft of prop making. Especially when it comes to peoples fast growing interests in everything related to 3d printing these days.
Links to the 3D model, as well as a list of some of the materials and tools I use can be found below.
I really hope you enjoy it:)
Chapters
0:00 Opening
0:24 Intro
1:25 Basic preparation
2:00 UV fast resin
4:55 Talcum & leftovers
8:55 Priming & painting
10:21 Best use
14:18 The final result
15:08 Up next time
Something to say: [email protected]
You can follow my prop making on Instagram: Instagram.com/propsnstuff
And sometimes on Facebook: facebook.com/justpropsnstuff
Want to support our passion on this channel? https://paypal.me/propsnstuff
Download the 3d model from the Do3d Site:
https://www.do3d.com/product-page/x-m...
And just in case you where wondering, here is some of the basic paints & materials I used in this videobuild and making stuff in general:
(Note, basic meaning there is no particular brand. Or maybe it’s s a product that is specific to Scandinavia)
Basic Filler Primer
Basic PLA filament
YBC UV Resin
Green Stuff World UV Resin
Basic UV LED Flashlight
Elegoo water washable 3Dprinting Resin
Basic Talcum
Assorted sanding sticks & paper
Green Stuff World acrylic paint
Basic rattle can high gloss varnish
Tamiya curved masking tape
Basic masking tape
And the FDM printer I use is an Creality CR10-V2
Music and editing with Final Cut Pro.
Music from the YouTube library:
Sunrise in paradise
Eternal Garden
Empire seasons
Beyond
Wind riders
Wrong
Remember: I myself am only an amateur at this.
So if you rely on the information shown or voiced in this video, you do so at your own risk.
Read the labels of all glues, paints and other materials you use, and always follow the proper instructions. And naturally, all the opinions voiced or shown in this video are only my own opinions. Have fun & stay safe!
I’m just a passionate hobbyist, that loves to make Props and other Stuff.
And so I am sharing this build just for the love of all things creative and hope to inspire others into the wonderful world of prop making.
This is my full video “build” of making the Wolverine Cowel. And since a lot of you ask repeatedly how I clean up my 3D prints
I’ve actually used talcum powder for mixing my paints, as far back as some 30ish years ago, when I attended art school. So its safe to say the trick has been around a while. And its always fun to look at new ways of using old teqniques with the ever evolving craft of prop making. Especially when it comes to peoples fast growing interests in everything related to 3d printing these days.
Links to the 3D model, as well as a list of some of the materials and tools I use can be found below.
I really hope you enjoy it:)
Chapters
0:00 Opening
0:24 Intro
1:25 Basic preparation
2:00 UV fast resin
4:55 Talcum & leftovers
8:55 Priming & painting
10:21 Best use
14:18 The final result
15:08 Up next time
Something to say: [email protected]
You can follow my prop making on Instagram: Instagram.com/propsnstuff
And sometimes on Facebook: facebook.com/justpropsnstuff
Want to support our passion on this channel? https://paypal.me/propsnstuff
Download the 3d model from the Do3d Site:
https://www.do3d.com/product-page/x-m...
And just in case you where wondering, here is some of the basic paints & materials I used in this videobuild and making stuff in general:
(Note, basic meaning there is no particular brand. Or maybe it’s s a product that is specific to Scandinavia)
Basic Filler Primer
Basic PLA filament
YBC UV Resin
Green Stuff World UV Resin
Basic UV LED Flashlight
Elegoo water washable 3Dprinting Resin
Basic Talcum
Assorted sanding sticks & paper
Green Stuff World acrylic paint
Basic rattle can high gloss varnish
Tamiya curved masking tape
Basic masking tape
And the FDM printer I use is an Creality CR10-V2
Music and editing with Final Cut Pro.
Music from the YouTube library:
Sunrise in paradise
Eternal Garden
Empire seasons
Beyond
Wind riders
Wrong
Remember: I myself am only an amateur at this.
So if you rely on the information shown or voiced in this video, you do so at your own risk.
Read the labels of all glues, paints and other materials you use, and always follow the proper instructions. And naturally, all the opinions voiced or shown in this video are only my own opinions. Have fun & stay safe!
3 سال پیش
در تاریخ 1400/10/03 منتشر شده
است.
1,270,615
بـار بازدید شده