How to Build a Columned Room Divider | This Old House
132 هزار بار بازدید -
10 سال پیش
-
Use MDF panels and wood
Use MDF panels and wood molding to transform your entry with a stately new built-in. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for How to Build a Columned Room Divider:
- 3/4-inch medium-density fiberboard (MDF). Get three 4-by-8-foot sheets for an 8 1/2-foot ceiling.
- 2x8 lumber, to build the base
- Shims
- Solid crown molding, to trim the capital and the cabinet top
- Baseboard molding
- 1/2-inch and 3/4-inch quarter-round molding, for the base cap and shoe molding
- 1 1/2-inch MDF screws, to assemble the boxes
- 2 1/2-inch deck screws, to install the base and the blocking
- 1 1/4-inch brad nails
- Construction adhesive
- Wood filler and paintable caulk
- Primer and paint
Tools for How to Build a Columned Room Divider:
- Tape measure
- Straightedge
- Clamps
- Circular saw
- Caulk gun
- Drill/driver
- Countersink bit
- 4-foot level
- Pneumatic brad nailer and air compressor
- Combination square
- Miter saw
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Build a Columned Room Divider | This Old House
thisoldhouse
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for How to Build a Columned Room Divider:
- 3/4-inch medium-density fiberboard (MDF). Get three 4-by-8-foot sheets for an 8 1/2-foot ceiling.
- 2x8 lumber, to build the base
- Shims
- Solid crown molding, to trim the capital and the cabinet top
- Baseboard molding
- 1/2-inch and 3/4-inch quarter-round molding, for the base cap and shoe molding
- 1 1/2-inch MDF screws, to assemble the boxes
- 2 1/2-inch deck screws, to install the base and the blocking
- 1 1/4-inch brad nails
- Construction adhesive
- Wood filler and paintable caulk
- Primer and paint
Tools for How to Build a Columned Room Divider:
- Tape measure
- Straightedge
- Clamps
- Circular saw
- Caulk gun
- Drill/driver
- Countersink bit
- 4-foot level
- Pneumatic brad nailer and air compressor
- Combination square
- Miter saw
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Build a Columned Room Divider | This Old House
thisoldhouse
10 سال پیش
در تاریخ 1393/10/18 منتشر شده
است.
132,093
بـار بازدید شده