Autocad 2018 - How to draw furniture to floor plan
94.2 هزار بار بازدید -
7 سال پیش
-
In this tutorial I teach
In this tutorial I teach to draw furniture to a floor plan. There are 3 exercices explained step by step where I used 12 commands.
Link to the exercises file:
https://drive.google.com/file/d/1hXi0...
CONTENTS:
Shower Plate
00:22 Step 1 - (command "rectangle")
01:05 Step 2 - (command "offset")
01:55 Step 3 - (command "fillet" for the corners)
02:54 Step 4 - (command "circle")
03:23 Step 5 - (draw lines and use of command "rotate")
05:09 Step 6 - (draw the drain - commands "line" and "mirror")
Toilet
06:37 Step 1 - (command "ellipse")
07:38 Step 2 - (commands "rectangle", "fillet" and "arc"(3 point))
10:40 Step 3 - (commands "offset" and "trim")
11:34 Step 4 - (command "line" and "trim")
12:37 Step 5 - (command "circle")
Wash Basin
13:19 Step 1 - (command "ellipse"(center), "offset")
14:40 Step 2 - (commands "circle", "offset", "extend" and "arc")
18:43 Step 3 - (commands "circle", "polar array" and "trim")
22:19 Step 4 - (command "rectangle")
List of commands focused in this tutorial:
LINE
RECTANGLE
CIRCLE
ELLIPSE
ARC
ROTATE
TRIM
EXTEND
MIRROR
OFFSET
FILLET
ARRAY (POLAR)
Licence:
The video shows the version 2013 of AutoCAD® and it is used exclusively for educational purposes.
Autodesk screen shots reprinted courtesy of Autodesk, Inc.
The narration and all the illustrations were created by CAD in Black.
Link to the exercises file:
https://drive.google.com/file/d/1hXi0...
CONTENTS:
Shower Plate
00:22 Step 1 - (command "rectangle")
01:05 Step 2 - (command "offset")
01:55 Step 3 - (command "fillet" for the corners)
02:54 Step 4 - (command "circle")
03:23 Step 5 - (draw lines and use of command "rotate")
05:09 Step 6 - (draw the drain - commands "line" and "mirror")
Toilet
06:37 Step 1 - (command "ellipse")
07:38 Step 2 - (commands "rectangle", "fillet" and "arc"(3 point))
10:40 Step 3 - (commands "offset" and "trim")
11:34 Step 4 - (command "line" and "trim")
12:37 Step 5 - (command "circle")
Wash Basin
13:19 Step 1 - (command "ellipse"(center), "offset")
14:40 Step 2 - (commands "circle", "offset", "extend" and "arc")
18:43 Step 3 - (commands "circle", "polar array" and "trim")
22:19 Step 4 - (command "rectangle")
List of commands focused in this tutorial:
LINE
RECTANGLE
CIRCLE
ELLIPSE
ARC
ROTATE
TRIM
EXTEND
MIRROR
OFFSET
FILLET
ARRAY (POLAR)
Licence:
The video shows the version 2013 of AutoCAD® and it is used exclusively for educational purposes.
Autodesk screen shots reprinted courtesy of Autodesk, Inc.
The narration and all the illustrations were created by CAD in Black.
7 سال پیش
در تاریخ 1396/07/12 منتشر شده
است.
94,257
بـار بازدید شده