Setup and test of the Ridgid R4251 12" Dual Bevel Sliding Miter Saw!
6.6 هزار بار بازدید -
2 سال پیش
-
I've been wanting to replace
I've been wanting to replace my radial arm saw for awhile, so after doing a bunch of research I decided to go with the Ridgid R4251 12" Dual Bevel Sliding Miter Saw. In this video I'm going to get the saw out of the box, get it assembled and set up, test it and do any adjustments that are needed.
If you are looking for a specific part of the set up click on the timecode below:
00:00 - Introduction
00:22 - Disclaimer
01:03 - Opening the Box
06:37 - Measurements
08:24 - Assembly
21:45 - Testing the Saw
36:18 - Specs
Specifications:
Cutting Capacity:
0 degree miter/0 degree bevel - 4" x 14"
45 degree miter/0 degree bevel - 4" x 10"
0 degree miter/45 degree bevel - 2" x 14"
45 degree miter/45 degree bevel - 2" x 10"
Baseboard (Vertical): 6.5"
Crown (Vertically Nested): 7.5"
Net Weight: 57 lbs
Power Input: 120V. 60hz, 15 Amps
Blade Arbor Hole: 1" (with 5/8" reducing spacer)
Blade Diameter: 12"
No Load Speed: 4,000 RPM
Blade Max Speed Rating: 5,500 RPM
Thanks for watching!
https://sean-does-diy.creator-spring.com
Digital Angle Finder - https://amzn.to/362UYhP
SeanDoesDIY may earn an affiliate commission, at no cost to you, if you purchase an item through recommended links.
#WoodShop #MiterSaw #Woodworking #DIY
www.seandoesdiy.com
[email protected]
Follow Sean on Social Media:
Facebook: Facebook: SeanDoesDIY
Instagram: https://www.instagram.com/seandoesdiy...
Pinterest: Pinterest: seandoesdiy
Twitter: Twitter: seandoesdiy
Disclaimer:
Videos produced by SeanDoesDIY are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use a clear mind and use all safety precautions while following the tutorials provided by SeanDoesDIY. SeanDoesDIY does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and SeanDoesDIY cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said SeanDoesDIY cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, know your limits and have fun doing.
If you are looking for a specific part of the set up click on the timecode below:
00:00 - Introduction
00:22 - Disclaimer
01:03 - Opening the Box
06:37 - Measurements
08:24 - Assembly
21:45 - Testing the Saw
36:18 - Specs
Specifications:
Cutting Capacity:
0 degree miter/0 degree bevel - 4" x 14"
45 degree miter/0 degree bevel - 4" x 10"
0 degree miter/45 degree bevel - 2" x 14"
45 degree miter/45 degree bevel - 2" x 10"
Baseboard (Vertical): 6.5"
Crown (Vertically Nested): 7.5"
Net Weight: 57 lbs
Power Input: 120V. 60hz, 15 Amps
Blade Arbor Hole: 1" (with 5/8" reducing spacer)
Blade Diameter: 12"
No Load Speed: 4,000 RPM
Blade Max Speed Rating: 5,500 RPM
Thanks for watching!
https://sean-does-diy.creator-spring.com
Digital Angle Finder - https://amzn.to/362UYhP
SeanDoesDIY may earn an affiliate commission, at no cost to you, if you purchase an item through recommended links.
#WoodShop #MiterSaw #Woodworking #DIY
www.seandoesdiy.com
[email protected]
Follow Sean on Social Media:
Facebook: Facebook: SeanDoesDIY
Instagram: https://www.instagram.com/seandoesdiy...
Pinterest: Pinterest: seandoesdiy
Twitter: Twitter: seandoesdiy
Disclaimer:
Videos produced by SeanDoesDIY are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use a clear mind and use all safety precautions while following the tutorials provided by SeanDoesDIY. SeanDoesDIY does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and SeanDoesDIY cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said SeanDoesDIY cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, know your limits and have fun doing.
2 سال پیش
در تاریخ 1400/11/18 منتشر شده
است.
6,675
بـار بازدید شده