Making an IRS Center section Drive Spool: Affordable Easy and NO LATHE!
25.1 هزار بار بازدید -
2 سال پیش
-
Check Description for links to
Check Description for links to plans, detailed build series, FaceBook build group and more!
A year of development has led to this; A super strong Center Carrier for any IRS application without the need for a lathe. Built from readily available off the shelf parts along with accurate laser cut parts so you can assemble yourself for a fraction of the cost. This is what you have been looking for! I know this because as a builder I've been trying to find this for almost 20 years. Plans below show the required parts with part numbers for a complete IRS setup for 420 or 520/530 chains, .dxf files to upload for laser cutting, measurements for all parts, every single nut and bolt needed for assembly and plenty of pictures and walkthroughs. This setup is appx 56" hub face to hub face and has proven 15" or more of travel without binding. This has been missing for the home fabricators for too long. Enjoy!
-Kyle
Plans available here:
https://kj-raycing.dpdcart.com
100+hp Build Series Here: 100+HP Crosskart Build #1: Starting t...
Budget Build Series Here: Inexpensive Crosskart Build Introduction
2 Seat Crosskart Build Series Here: Two Seat Crosskart Build #1
VF-1 Plans detail and Materials needed
Crosskart Plans: KJ Raycing Crosskart...
Custom length chassis
Inexpensive Crosskart Build Introduction
Preferred tubing bender and notcher
Roguefab.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) Facebook: 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
A year of development has led to this; A super strong Center Carrier for any IRS application without the need for a lathe. Built from readily available off the shelf parts along with accurate laser cut parts so you can assemble yourself for a fraction of the cost. This is what you have been looking for! I know this because as a builder I've been trying to find this for almost 20 years. Plans below show the required parts with part numbers for a complete IRS setup for 420 or 520/530 chains, .dxf files to upload for laser cutting, measurements for all parts, every single nut and bolt needed for assembly and plenty of pictures and walkthroughs. This setup is appx 56" hub face to hub face and has proven 15" or more of travel without binding. This has been missing for the home fabricators for too long. Enjoy!
-Kyle
Plans available here:
https://kj-raycing.dpdcart.com
100+hp Build Series Here: 100+HP Crosskart Build #1: Starting t...
Budget Build Series Here: Inexpensive Crosskart Build Introduction
2 Seat Crosskart Build Series Here: Two Seat Crosskart Build #1
VF-1 Plans detail and Materials needed
Crosskart Plans: KJ Raycing Crosskart...
Custom length chassis
Inexpensive Crosskart Build Introduction
Preferred tubing bender and notcher
Roguefab.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) Facebook: 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
2 سال پیش
در تاریخ 1401/10/17 منتشر شده
است.
25,196
بـار بازدید شده