Rewiring an MP Mini no drill method
26.4 هزار بار بازدید -
7 سال پیش
-
Use a 3D printed side
Use a 3D printed side panel to rewire your MP Mini and avoid possible damage in the future. You will need a couple of basic 3D printed parts and simple tools.
In fact, if you're in a pinch, you could do this without any tools except for a screwdriver and even skip the printed parts...it just wouldn't be as nice of a finish.
Great guide that I followed
https://www.pingle.org/2017/10/08/rew...
Side Panel part 1
https://www.thingiverse.com/thing:171...
Side Panel part 2
https://www.thingiverse.com/thing:245...
Optional cable guide
https://www.thingiverse.com/thing:193...
Minimal cable guide
https://www.thingiverse.com/thing:284...
In fact, if you're in a pinch, you could do this without any tools except for a screwdriver and even skip the printed parts...it just wouldn't be as nice of a finish.
Great guide that I followed
https://www.pingle.org/2017/10/08/rew...
Side Panel part 1
https://www.thingiverse.com/thing:171...
Side Panel part 2
https://www.thingiverse.com/thing:245...
Optional cable guide
https://www.thingiverse.com/thing:193...
Minimal cable guide
https://www.thingiverse.com/thing:284...
7 سال پیش
در تاریخ 1396/09/26 منتشر شده
است.
26,491
بـار بازدید شده