Juki PS800 --setting the base
13.8 هزار بار بازدید -
3 سال پیش
-
This video shows the procedure
This video shows the procedure when installing a new clamp and pattern.
The starting position of the pattern needs to be set. This is referred to as the BASE. Once this is complete, the machine will remember the settings.
The starting position of the pattern needs to be set. This is referred to as the BASE. Once this is complete, the machine will remember the settings.
3 سال پیش
در تاریخ 1400/03/13 منتشر شده
است.
13,883
بـار بازدید شده