Quadrajet Bushings, Choke and Fast Idle System
10.3 هزار بار بازدید -
2 سال پیش
-
Part 2 of the Quadrajet
Part 2 of the Quadrajet 704 rebuild series, covers the installation of bronze primary throttle shaft bushings, which is a must-do upgrade for anyone rebuilding a Quadrajet, plus the installation of a new choke pull-off vacuum brake actuator and also putting the base throttle plate back together.
======================================
CONTENTS
00:00 Sealing a Potential Vacuum Leak
01:04 Drilling the Base Plate for Bushings
02:22 Installing Bronze Throttle Shaft Bushings
05:03 Test-Fitting the Throttle Shaft
06:33 Installing a New Choke Pull-Off Vacuum Brake
09:51 Reassembling the Base/Throttle Plate
29:20 Applying Red Thread Locker to the Blade (Butterfly) Screws
30:20 Power Piston and Primary Metering Rods
Part 3, the series finale, will cover the final touches of carburetor reassembly as well as basic adjustments.
Thank you for watching! 🙂👍🏻
👉 Rochester Quadrajet Carburetor Disassembly Sequence: https://bit.ly/3ME3HYq
👉 Rochester Quadrajet Carburetor Reassembly Sequence: https://bit.ly/38FljUQ
======================================
CORVETTE PRODUCTS (sponsored)
⭐️ Realth Threadlocker M271 High Strength: https://amzn.to/3wlGOSv
- 76 Vette Assembly Manual: https://amzn.to/2GBuHrd
- 68-82 Corvette Manual: https://amzn.to/3devEEW
- How to Restore Corvette: https://amzn.to/35B6L0R
- 68-82 Vette Resto Guide: https://amzn.to/2QvvIG
======================================
DISCLAIMER: Even though I like to wrench on Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.
The repairs and other work I do are for my own benefit and entertainment, and even though my videos may sound and appear to give technical how-to advice, that's not my intention.
Working on a vehicle is inherently dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a licensed mechanic.
#corvettec3 #c3corvette #carburetor
======================================
CONTENTS
00:00 Sealing a Potential Vacuum Leak
01:04 Drilling the Base Plate for Bushings
02:22 Installing Bronze Throttle Shaft Bushings
05:03 Test-Fitting the Throttle Shaft
06:33 Installing a New Choke Pull-Off Vacuum Brake
09:51 Reassembling the Base/Throttle Plate
29:20 Applying Red Thread Locker to the Blade (Butterfly) Screws
30:20 Power Piston and Primary Metering Rods
Part 3, the series finale, will cover the final touches of carburetor reassembly as well as basic adjustments.
Thank you for watching! 🙂👍🏻
👉 Rochester Quadrajet Carburetor Disassembly Sequence: https://bit.ly/3ME3HYq
👉 Rochester Quadrajet Carburetor Reassembly Sequence: https://bit.ly/38FljUQ
======================================
CORVETTE PRODUCTS (sponsored)
⭐️ Realth Threadlocker M271 High Strength: https://amzn.to/3wlGOSv
- 76 Vette Assembly Manual: https://amzn.to/2GBuHrd
- 68-82 Corvette Manual: https://amzn.to/3devEEW
- How to Restore Corvette: https://amzn.to/35B6L0R
- 68-82 Vette Resto Guide: https://amzn.to/2QvvIG
======================================
DISCLAIMER: Even though I like to wrench on Corvettes and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.
The repairs and other work I do are for my own benefit and entertainment, and even though my videos may sound and appear to give technical how-to advice, that's not my intention.
Working on a vehicle is inherently dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a licensed mechanic.
#corvettec3 #c3corvette #carburetor
2 سال پیش
در تاریخ 1401/04/23 منتشر شده
است.
10,384
بـار بازدید شده