How to Replace Front Left CV Axle Assembly 2003-2007 Honda Accord
25.5 هزار بار بازدید -
9 ماه پیش
-
Buy Now!New CV Axle Assembly
Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00123
This video shows you how to install a new front left CV axle assembly from TRQ on your 2003-2007 Honda Accord. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar http://1aau.to/oXo/1AXAA00020
• 14mm Wrench http://1aau.to/oZD/1AXAA00010
• 17mm Wrench http://1aau.to/oZD/1AXAA00010
• 14mm Socket http://1aau.to/obEt/1AXAA00015
• 17mm Socket http://1aau.to/obEt/1AXAA00015
• 19mm Socket http://1aau.to/oanh/1AXAA00043
• 32mm Socket http://1aau.to/ocX/1AAST00003
• Locking Pliers http://1aau.to/omy/1AXAA00139
• Pliers
• 1/2 Inch Impact Gun http://1aau.to/ou2/1AXAA00252
• Swivel
• Torque Wrench http://1aau.to/oaMn/1AXAA00044
• Cloth Rags http://1aau.to/oE7/1AXSS00035
• Gloves http://1aau.to/oanC/1AXSS00048
• Safety Glasses http://1aau.to/oafr/1AXAA00343
• 3/16 Allen Wrench http://1aau.to/o2/1AXAA00006
• Drain Pan http://1aau.to/oB3/1AXAA00320
• Floor Jack http://1aau.to/oabA/1AXAA00068
• Hammer http://1aau.to/oWV/1AXAA00091
• Jack Stands http://1aau.to/oYz/1AXAA00065
• Punch
• Rubber Mallet http://1aau.to/oho/1AXAA00413
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00123
This video shows you how to install a new front left CV axle assembly from TRQ on your 2003-2007 Honda Accord. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar http://1aau.to/oXo/1AXAA00020
• 14mm Wrench http://1aau.to/oZD/1AXAA00010
• 17mm Wrench http://1aau.to/oZD/1AXAA00010
• 14mm Socket http://1aau.to/obEt/1AXAA00015
• 17mm Socket http://1aau.to/obEt/1AXAA00015
• 19mm Socket http://1aau.to/oanh/1AXAA00043
• 32mm Socket http://1aau.to/ocX/1AAST00003
• Locking Pliers http://1aau.to/omy/1AXAA00139
• Pliers
• 1/2 Inch Impact Gun http://1aau.to/ou2/1AXAA00252
• Swivel
• Torque Wrench http://1aau.to/oaMn/1AXAA00044
• Cloth Rags http://1aau.to/oE7/1AXSS00035
• Gloves http://1aau.to/oanC/1AXSS00048
• Safety Glasses http://1aau.to/oafr/1AXAA00343
• 3/16 Allen Wrench http://1aau.to/o2/1AXAA00006
• Drain Pan http://1aau.to/oB3/1AXAA00320
• Floor Jack http://1aau.to/oabA/1AXAA00068
• Hammer http://1aau.to/oWV/1AXAA00091
• Jack Stands http://1aau.to/oYz/1AXAA00065
• Punch
• Rubber Mallet http://1aau.to/oho/1AXAA00413
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
9 ماه پیش
در تاریخ 1402/07/18 منتشر شده
است.
25,557
بـار بازدید شده