Heat Not Working in Your Car or Truck? How to Decide if a Blend Door or Actuator is The Problem
88.3 هزار بار بازدید -
2 سال پیش
-
Shop for New Auto Parts
Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/134/U/ac-and-heater-...
If you're experiencing trouble with your car's heat, whether it's not working on one side or not responding to commands, or you hear a clicking noise coming from behind the dash, it could be a blend door actuator or a blend door itself. In this video, Andy shows you how to diagnose and troubleshoot common car and truck heating problems. He'll take you through the process of locating the blend door actuator, which is attached to the heater box and located underneath the dash, and show you how to replace it. He'll also show you how to check for problems with the blend door itself, which can cause a clicking noise.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oa5L/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oa5L/1AXAA00013
• Complete Metric Socket Set http://1aau.to/o4S/1AXAA00043
• Trim Tool Set http://1aau.to/oXe/1AXXX00006
• Ratchet http://1aau.to/obiz/1AXAA00016
• Socket Extensions http://1aau.to/oa7I/1AXAA00015
Subscribe: @1aauto
For More Info visit us at http://1aau.to/h/ebB/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
If you're experiencing trouble with your car's heat, whether it's not working on one side or not responding to commands, or you hear a clicking noise coming from behind the dash, it could be a blend door actuator or a blend door itself. In this video, Andy shows you how to diagnose and troubleshoot common car and truck heating problems. He'll take you through the process of locating the blend door actuator, which is attached to the heater box and located underneath the dash, and show you how to replace it. He'll also show you how to check for problems with the blend door itself, which can cause a clicking noise.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oa5L/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oa5L/1AXAA00013
• Complete Metric Socket Set http://1aau.to/o4S/1AXAA00043
• Trim Tool Set http://1aau.to/oXe/1AXXX00006
• Ratchet http://1aau.to/obiz/1AXAA00016
• Socket Extensions http://1aau.to/oa7I/1AXAA00015
Subscribe: @1aauto
For More Info visit us at http://1aau.to/h/ebB/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/10/28 منتشر شده
است.
88,390
بـار بازدید شده