Homemade DIY Beach Shade Canopy Setup (Easy To Make Cordless Windproof Beach Tent Sun Shade Design)
31.5 هزار بار بازدید -
پارسال
-
Watch the full how to
Watch the full how to make video here: Homemade DIY BEACH SHADE CANOPY LARGE...
This beach shade design does not need a sandbag and cord in front to hold it up. Using an 11ft by 9ft beach blanket provides up to 100 square feet of shade. To hold it in the sand, I used 2 beach umbrella lower poles from beach umbrellas that were being thrown away. The poles are 20ft of heavy-duty aluminum poles, although fiberglass poles could also work. The aluminum poles are stronger and corrosion-resistant. The leading edge pocket pass-through for the tent pole was made using strong double-sided fabric tape, so no sewing was necessary.
Check out this post for more details about the build and options - https://www.engineerable.com/single-p...
Check out the XL version that uses 2 beach blankets - Homemade DIY BEACH SHADE CANOPY X-LAR...
▼ WHERE TO BUY PARTS:
▶ Tent Poles - 25 feet in length (These are large diameter and strong. Leave out 3 sections to make it 20ft) - https://amzn.to/3sp8VPf
▶ Fabric (microfiber beach blanket works great and is quieter than Silpoly rip-stop fabric) - https://amzn.to/3oQ35s7
▶ Fabric Tape (No Sew) - https://amzn.to/3qA04wy
▶ 2 beach umbrella lower poles (harvested from old/broken beach umbrellas. They get thrown away all the time at the beach)
▶ Sand Gopher (Sand digger tool for beach umbrella hole) - https://amzn.to/3NlfRIu
▼ VISIT OUR WEBSITE
▶ Products we make: https://soulbuilt.us
▶▶ Amazon Store: https://www.amazon.com/stores/SoulBuilt
▶ Engineering: https://www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: Instagram: soul.built
▶ Facebook: Facebook: soulbuilt.us
▼ DIY Beach Tent Shade Video Chapters:
00:00 DIY Beach Shade Tent Pole Setup
00:15 Arch Support made from old beach umbrella poles
00:25 Use Sand Gopher to dig hole for beach umbrella pole
00:35 Use Beach Blanket for sunshade canopy sail
00:46 Insert tent pole into beach umbrella pole
00:57 Bend the tent pole into an arch
01:08 Use Sand Gopher to dig other hole for beach umbrella pole
01:24 Attach beach blanket ends to umbrella poles to stretch tight
01:36 Enjoy the shade!
01:57 Compare to beach tents on the edge of blowing away
02:07 Walkaround of DIY beach sun shade
02:58 Closeup of the support poles made from trashed beach umbrella poles
Homemade DIY Windproof Beach Shade Canopy Setup (Easy To Make Cordless Beach Tent Sun Shade Design)
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY.
This beach shade design does not need a sandbag and cord in front to hold it up. Using an 11ft by 9ft beach blanket provides up to 100 square feet of shade. To hold it in the sand, I used 2 beach umbrella lower poles from beach umbrellas that were being thrown away. The poles are 20ft of heavy-duty aluminum poles, although fiberglass poles could also work. The aluminum poles are stronger and corrosion-resistant. The leading edge pocket pass-through for the tent pole was made using strong double-sided fabric tape, so no sewing was necessary.
Check out this post for more details about the build and options - https://www.engineerable.com/single-p...
Check out the XL version that uses 2 beach blankets - Homemade DIY BEACH SHADE CANOPY X-LAR...
▼ WHERE TO BUY PARTS:
▶ Tent Poles - 25 feet in length (These are large diameter and strong. Leave out 3 sections to make it 20ft) - https://amzn.to/3sp8VPf
▶ Fabric (microfiber beach blanket works great and is quieter than Silpoly rip-stop fabric) - https://amzn.to/3oQ35s7
▶ Fabric Tape (No Sew) - https://amzn.to/3qA04wy
▶ 2 beach umbrella lower poles (harvested from old/broken beach umbrellas. They get thrown away all the time at the beach)
▶ Sand Gopher (Sand digger tool for beach umbrella hole) - https://amzn.to/3NlfRIu
▼ VISIT OUR WEBSITE
▶ Products we make: https://soulbuilt.us
▶▶ Amazon Store: https://www.amazon.com/stores/SoulBuilt
▶ Engineering: https://www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: Instagram: soul.built
▶ Facebook: Facebook: soulbuilt.us
▼ DIY Beach Tent Shade Video Chapters:
00:00 DIY Beach Shade Tent Pole Setup
00:15 Arch Support made from old beach umbrella poles
00:25 Use Sand Gopher to dig hole for beach umbrella pole
00:35 Use Beach Blanket for sunshade canopy sail
00:46 Insert tent pole into beach umbrella pole
00:57 Bend the tent pole into an arch
01:08 Use Sand Gopher to dig other hole for beach umbrella pole
01:24 Attach beach blanket ends to umbrella poles to stretch tight
01:36 Enjoy the shade!
01:57 Compare to beach tents on the edge of blowing away
02:07 Walkaround of DIY beach sun shade
02:58 Closeup of the support poles made from trashed beach umbrella poles
Homemade DIY Windproof Beach Shade Canopy Setup (Easy To Make Cordless Beach Tent Sun Shade Design)
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY.
پارسال
در تاریخ 1402/03/22 منتشر شده
است.
31,558
بـار بازدید شده