How to do a Wastegate Actuator Bench Calibration and Adaptation (MK7/IS20/IS38)
26.7 هزار بار بازدید -
3 سال پیش
-
I wanted to set my
I wanted to set my wastegate actuator voltage BEFORE putting the turbo in the car so I didn't have to worry about access to the adjustment rod. Here is the process. This process is most useful when you want/need to calibrate the wastegate to a turbo, but might not have the car readily available or don't want to take it out to the car for the calibration process... or you don't want to put the car back together to turn on the ignition... lol Lots of reasons why this could be useful. There ARE other ways to calibrate a wastegate actuator. This is the bench method.
3 سال پیش
در تاریخ 1400/12/13 منتشر شده
است.
26,795
بـار بازدید شده