THE BEST 1969 Z/28 WE HAVE EVER HAD!
1.8 هزار بار بازدید -
4 سال پیش
-
S5: E7 New Inventory at
S5: E7
New Inventory at The Barn! The ultimate muscle car - the 1969 Chevy Camaro Z/28.
An absolute gorgeous car with a meticulous nut and bolt proper and high quality restoration. Finished in Fathom Green over Midnight Green interior. With correct DZ 308 V8 engine mated to a factory 4 speed Hurst.
This car makes you feel special and way cooler than anyone else. The unmistakable rumble of that V8 and shifting gears puts you back in time. Like we always say...cars are true time machines.
Additional info provided by wikipedia:
The first-generation Chevrolet Camaro is an American pony car which appeared in Chevrolet dealerships on September 29, 1966 for the 1967 model year on a brand-new rear wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible, with the choice of either a straight-6 or V8 engine. The first-generation Camaro was built through the 1969 model year.
Almost all of 1967-1969 Camaros were built in the two U.S. assembly plants: Norwood, Ohio and Van Nuys, California. There were also five non-U.S. Camaro assembly plants in countries that required local assembly and content. These plants were located in the Philippines, Belgium, Switzerland, Venezuela, and Peru]
If you enjoyed this video, please like, share and subscribe! We look forward to bringing you more reviews on exclusive cars.
The Camaro's standard drivetrain was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) at 4400 rpm and 220 lb⋅ft (298 N⋅m) of torque at 1600 rpm;[8] or a 327 cu in (5.4 L) and 307 cu in (5.0 L) (later in 1969) V8s, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS 396 cars was the Turbo 400 three-speed automatic.
There was a plethora of other options available all three years, including three main packages:
The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model.
The SS performance package consisted of a 350 cu in (5.7 L) or 396 cu in (6.5 L) V8s and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging.
The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am Series. It included a solid-lifter 302 cu in (4.9 L) V8, 4-speed transmission, power disc brakes, and two wide "skunk" stripes down the hood and trunk lid.
The idea of offering such a wide variety of packages and numerous options was to "blanket" Camaro's end of the personal car market with everything from an entry level I6 cylinder engine to multiple high-performance V8 engines.
The 1969 Camaro carried over the previous year's drivetrain and major mechanical components, but all-new sheet metal, except the hood and trunk lid, gave the car a substantially sportier look. The grille was redesigned with a heavy "V" cant and deeply inset headlights. New door skins, rear quarter panels, and rear valance panel also gave the car a much lower, wider, more aggressive look. This styling would serve for the 1969 model year only.
hts below rear bumper; also includes bright roof drip moldings on Sport Coupe. $131.65, 37,773 built. This option could be added to any other option (i.e., SS or Z/28), making the model an RS/SS or a RS/Z28.
The Z28 option was still available with the 302 cu in (4.9 L) small block producing 290 hp (294 PS; 216 kW) at 5800 rpm and 290 lb⋅ft (393 N⋅m) of torque at 4200 rpm.[20] It was backed by Muncie four-speed with a new-for-69 standard Hurst shifter and connected to a 12-bolt rear axle with standard 3.73 gears. The 302 featured 11:1 compression, forged pistons, forged steel crankshaft and connecting rods, solid lifter camshaft, and
Follow Gaston on Instagram & Facebook:
Instagram: gastonrossato
Facebook: gastonrossato
http://gastonrossato.com/
The Barn Miami on Instagram & Facebook:
Instagram: thebarnmiami
Facebook: TheBarnMiami
thebarnmiami.com
And Renzo on Instagram:
Instagram: renzorossato
See listing:
https://www.thebarnmiami.com/vehicles...
Sign up to our VIP email list to see cars at least 48 hours before they become available to the public on the open market or social media:
https://docs.google.com/forms/d/e/1FA...
#camaro #1969camaro #camaroz28
MB01SYW3S4OY6GM
New Inventory at The Barn! The ultimate muscle car - the 1969 Chevy Camaro Z/28.
An absolute gorgeous car with a meticulous nut and bolt proper and high quality restoration. Finished in Fathom Green over Midnight Green interior. With correct DZ 308 V8 engine mated to a factory 4 speed Hurst.
This car makes you feel special and way cooler than anyone else. The unmistakable rumble of that V8 and shifting gears puts you back in time. Like we always say...cars are true time machines.
Additional info provided by wikipedia:
The first-generation Chevrolet Camaro is an American pony car which appeared in Chevrolet dealerships on September 29, 1966 for the 1967 model year on a brand-new rear wheel drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop (no "B" or center pillar) or convertible, with the choice of either a straight-6 or V8 engine. The first-generation Camaro was built through the 1969 model year.
Almost all of 1967-1969 Camaros were built in the two U.S. assembly plants: Norwood, Ohio and Van Nuys, California. There were also five non-U.S. Camaro assembly plants in countries that required local assembly and content. These plants were located in the Philippines, Belgium, Switzerland, Venezuela, and Peru]
If you enjoyed this video, please like, share and subscribe! We look forward to bringing you more reviews on exclusive cars.
The Camaro's standard drivetrain was either a 230 cu in (3.8 L) straight-6 engine rated at 140 hp (104 kW) at 4400 rpm and 220 lb⋅ft (298 N⋅m) of torque at 1600 rpm;[8] or a 327 cu in (5.4 L) and 307 cu in (5.0 L) (later in 1969) V8s, with a standard three-speed manual transmission. There were 8 (in 1967), 10 (in 1968), and 12 (in 1969) different engines available in 1967-1969 Camaros. There were several optional transmissions. A four-speed manual was available with any engine. The two-speed "Powerglide" automatic transmission was available all three years. The three-speed "Turbo Hydra-Matic 350" automatic became available starting in 1969. The optional automatic for SS 396 cars was the Turbo 400 three-speed automatic.
There was a plethora of other options available all three years, including three main packages:
The RS was an appearance package that included hidden headlights, revised taillights with back-up lights under the rear bumper, RS badging, and exterior bright trim. It was available on any model.
The SS performance package consisted of a 350 cu in (5.7 L) or 396 cu in (6.5 L) V8s and chassis upgrades for better handling and to deal with the additional power. The SS featured non-functional air inlets on the hood, special striping, and SS badging.
The Z/28 performance package was designed (with further modifications) to compete in the SCCA Trans-Am Series. It included a solid-lifter 302 cu in (4.9 L) V8, 4-speed transmission, power disc brakes, and two wide "skunk" stripes down the hood and trunk lid.
The idea of offering such a wide variety of packages and numerous options was to "blanket" Camaro's end of the personal car market with everything from an entry level I6 cylinder engine to multiple high-performance V8 engines.
The 1969 Camaro carried over the previous year's drivetrain and major mechanical components, but all-new sheet metal, except the hood and trunk lid, gave the car a substantially sportier look. The grille was redesigned with a heavy "V" cant and deeply inset headlights. New door skins, rear quarter panels, and rear valance panel also gave the car a much lower, wider, more aggressive look. This styling would serve for the 1969 model year only.
hts below rear bumper; also includes bright roof drip moldings on Sport Coupe. $131.65, 37,773 built. This option could be added to any other option (i.e., SS or Z/28), making the model an RS/SS or a RS/Z28.
The Z28 option was still available with the 302 cu in (4.9 L) small block producing 290 hp (294 PS; 216 kW) at 5800 rpm and 290 lb⋅ft (393 N⋅m) of torque at 4200 rpm.[20] It was backed by Muncie four-speed with a new-for-69 standard Hurst shifter and connected to a 12-bolt rear axle with standard 3.73 gears. The 302 featured 11:1 compression, forged pistons, forged steel crankshaft and connecting rods, solid lifter camshaft, and
Follow Gaston on Instagram & Facebook:
Instagram: gastonrossato
Facebook: gastonrossato
http://gastonrossato.com/
The Barn Miami on Instagram & Facebook:
Instagram: thebarnmiami
Facebook: TheBarnMiami
thebarnmiami.com
And Renzo on Instagram:
Instagram: renzorossato
See listing:
https://www.thebarnmiami.com/vehicles...
Sign up to our VIP email list to see cars at least 48 hours before they become available to the public on the open market or social media:
https://docs.google.com/forms/d/e/1FA...
#camaro #1969camaro #camaroz28
MB01SYW3S4OY6GM
4 سال پیش
در تاریخ 1399/04/31 منتشر شده
است.
1,833
بـار بازدید شده