DIY trike build part 2. Cranks and steering.
26.3 هزار بار بازدید -
4 سال پیش
-
DIY trike built part 2.
DIY trike built part 2. Cranks and steering.
Next phase of construction including crank/bottom bracket assembly, with built in adjustability in the form of a QR skewer from the Trek donor bike.
Beginnings of the steering assembly using rod end bearings and aluminium flat bar. Needs some tinkering as the positive camber may be a tad too much. We'll see how it rides before we change anything though.
Next phase of construction including crank/bottom bracket assembly, with built in adjustability in the form of a QR skewer from the Trek donor bike.
Beginnings of the steering assembly using rod end bearings and aluminium flat bar. Needs some tinkering as the positive camber may be a tad too much. We'll see how it rides before we change anything though.
4 سال پیش
در تاریخ 1399/02/29 منتشر شده
است.
26,303
بـار بازدید شده