Bullard Vertical Turret Lathe Model 54 Spiral Drive

Bullard Vertical Turret Lathe Model 54 Spiral Drive
Serial Number 19677
Table Size 50" 4 Jaw
Swing Side Head Above Table 56"
Swing Side Head Below Table 58"
Height Under Rail 35-1/2"
Table Speed 3.5 To 60 Rpm's
Floor To Table Height 34-/2"
Feeds .002 To .500 I.P.R.
Turret Head Travel Left To Right 34-1/2"
Turret Ram Head Turret Travel Up & Down 30"
Turret Head Position 5
Turret Head Swivel Yes
Side Head Travel In & Out 27"
Side Head Travel Up & Down 25"
Main Motor 25 Hp.Wired For 240 Volts 3 Phase
Machine Dimensions Length 10'
Machine Dimensions Width 9'6"
Machine Height 10'
Machine Needs To Be Elevated  6" Off The Floor  For the Bearing Nut.
Bearing Nut 16"X 16" X 5" Height
Machine Weight 25,000 Lbs.
Note: Turret & Side Head Gear Boxes Have Been Reconditioned. Spindle & Transmission Have Been Pulled and Check. Oil Has Been Drained And Tanks Has Been Cleaned. Side Has Been Removed And Check And Cleaned. New Electric Motors And Gear Boxes For Turret Rapid Travel Left To Right And Up And Down. New Electric Motor For Rail Elevation And Gear Box Complete With Electrics.  New Belts. Machine Has Been Cleaned, Painted And Cycled.

• #people_blogs
• #bullard_vertical_turret_lathe
• #vtl
• #bullard