SRAM Road AXS | How to: Bed-in disc brakes
36.4 هزار بار بازدید -
پارسال
-
When brake pads and rotors
When brake pads and rotors are new, they must be “bed-in” to reach their full braking potential. Doing so increases friction between pads and rotors by evenly distributing or "bedding in" pad material to the rotor.
1. To bed-in your brakes, go outside and find an empty flat parking lot.
2. Stay seated while riding, and avoid locking up your rear wheel.
3. Accelerate to a moderate speed, then evenly apply the brakes to slow to a walking speed, then release the brakes. Repeat this process 20 times.
4. Accelerate to a fast speed, then evenly apply the brakes to slow to a walking speed, then release the brakes. Repeat this process 10 times.
5. Let the brakes cool before any further riding.
Watch the SRAM How To series → How to: SRAM Road
Subscribe to the SRAM channel → @sram
1. To bed-in your brakes, go outside and find an empty flat parking lot.
2. Stay seated while riding, and avoid locking up your rear wheel.
3. Accelerate to a moderate speed, then evenly apply the brakes to slow to a walking speed, then release the brakes. Repeat this process 20 times.
4. Accelerate to a fast speed, then evenly apply the brakes to slow to a walking speed, then release the brakes. Repeat this process 10 times.
5. Let the brakes cool before any further riding.
Watch the SRAM How To series → How to: SRAM Road
Subscribe to the SRAM channel → @sram
پارسال
در تاریخ 1401/12/10 منتشر شده
است.
36,457
بـار بازدید شده