Spiel CoilMaster Jr. - Coil Binding Machine (See the New CoilMaster Jr. TS video)
110 هزار بار بازدید -
11 سال پیش
-
SPIEL CoilMaster Jr. - Coil
SPIEL CoilMaster Jr. - Coil Binding Machine / Automatic Coil Insert, Cut & Crimp SEE THE NEW COILMASTER JR TS VIDEO!
Drop In a Pre-punched Book Block & Coil and The CoilMaster Jr. Finishes The Job!
Coil Bind Books up to 3/4" Thick
The Coilmaster Jr. is a desktop plastic spiral binder that will bind books from 3/16" to 3/4" (5 to 19mm) thick utilizing 8 to 25 mm (1/4" to 7/8") diameter coil. The binding lengths can range from 4" (101.6mm) to 12" (304.8 mm). We recommend a .248 pitch however, .2475", .250" or 6 mm pitch can be supplied if necessary.
Sequence of Operations
Place a book into the clamp and coil around the bullet. When the foot pedal is depressed the book is clamped. The coilbed (which holds a similar piece of coil) will drop down and the spinner roller will spin. After the coil has completely spun through the book, the lever above the bullet will trip, causing the coil to stop under the spinner roller, leaving a couple of loops behind. The cutting knives will then rise, cut, and drop down again. The clamp will then open to release the book. The spinner roller will engage again to spin the waste off of the bullet. This causes the book detector sensor to bring the coilbed up (after one second) for the next book.
Learn more; contact Brett; Toll Free: 1-800-ETBRETT (382-7388), send us an email: [email protected] or visit our website: www.etbrett.com
Drop In a Pre-punched Book Block & Coil and The CoilMaster Jr. Finishes The Job!
Coil Bind Books up to 3/4" Thick
The Coilmaster Jr. is a desktop plastic spiral binder that will bind books from 3/16" to 3/4" (5 to 19mm) thick utilizing 8 to 25 mm (1/4" to 7/8") diameter coil. The binding lengths can range from 4" (101.6mm) to 12" (304.8 mm). We recommend a .248 pitch however, .2475", .250" or 6 mm pitch can be supplied if necessary.
Sequence of Operations
Place a book into the clamp and coil around the bullet. When the foot pedal is depressed the book is clamped. The coilbed (which holds a similar piece of coil) will drop down and the spinner roller will spin. After the coil has completely spun through the book, the lever above the bullet will trip, causing the coil to stop under the spinner roller, leaving a couple of loops behind. The cutting knives will then rise, cut, and drop down again. The clamp will then open to release the book. The spinner roller will engage again to spin the waste off of the bullet. This causes the book detector sensor to bring the coilbed up (after one second) for the next book.
Learn more; contact Brett; Toll Free: 1-800-ETBRETT (382-7388), send us an email: [email protected] or visit our website: www.etbrett.com
11 سال پیش
در تاریخ 1392/01/23 منتشر شده
است.
110,062
بـار بازدید شده