Super Smoke machine XXL for your cosplay and props
53.2 هزار بار بازدید -
7 سال پیش
-
Cosplay Smoke machine now available
Cosplay Smoke machine now available for sale at:
https://waynesworkshopcosplay.com/shop/
Need a bigger blast of smoke? i got you covered!
presenting the super smoker XXL tutorial!
With a select few items i made this portable chimney that you can install in your favourite cosplay and props and be a sure headturner :D
leave your questions down below and i'll do my best to answer them :)
dont forget to hit that sub button and the bell icon to get notified.
follow me on facebook:
Facebook: waynesworkshops
Items used:
Wismec RX300:
https://www.aliexpress.com/item/Origi...
Eleaf melo 300:
https://aliexpress.com/item/New-Origi...
Airpumps:
https://aliexpress.com/item/New-DC-6V...
High capacity Lipos for vape mods, use these and only these as i am not responsible if you use crappy 1 dollar shit lipos:
https://nl.aliexpress.com/item/Bestfi...
Eleaf pico full set, it has a built in battery so this is a full package with atomizer, case, battery and a spare coil, i do NOT know the internals for this one so if you want to go cheap be ready to experiment YOURSELF:
https://aliexpress.com/item/New-E-Cig...
quick connect wire:
https://aliexpress.com/item/led-strip...
zipties, silicon tube and solder should be readily available in any hardware store :)
my smoke fluid is fogjuice that you can buy for 5 dollar per liter, its the stuff that gets dumped into the smokemachines in the clubs and disco.
glycerine is also possible but its way thicker than fogjuice and harder for the wool in the coil to absorb, so burning is more risky.
my best results came to use a mix of 50%glycerine-50%fogjuice
my other videos:
Movable foam armor plating
3 most used glues for cosplay - with ...
Extracting 3d models for Templates - ...
How to Layer your foam armor details.
Unfolding 3d models in Pepakura
Extracting 3d models for Templates - ...
powerbank mod for cosplay electronics
remote controlled cosplay!
Easy hammered weathering for Foam armor
Video
Pepakura basics, cutting and building
Pepakura basics, Scaling and how to d...
Pepakura basics, how to use for your ...
E-cig/vapepen smoke-machine for cospl...
E-cig/vapepen smoke-machine for cospl...
https://waynesworkshopcosplay.com/shop/
Need a bigger blast of smoke? i got you covered!
presenting the super smoker XXL tutorial!
With a select few items i made this portable chimney that you can install in your favourite cosplay and props and be a sure headturner :D
leave your questions down below and i'll do my best to answer them :)
dont forget to hit that sub button and the bell icon to get notified.
follow me on facebook:
Facebook: waynesworkshops
Items used:
Wismec RX300:
https://www.aliexpress.com/item/Origi...
Eleaf melo 300:
https://aliexpress.com/item/New-Origi...
Airpumps:
https://aliexpress.com/item/New-DC-6V...
High capacity Lipos for vape mods, use these and only these as i am not responsible if you use crappy 1 dollar shit lipos:
https://nl.aliexpress.com/item/Bestfi...
Eleaf pico full set, it has a built in battery so this is a full package with atomizer, case, battery and a spare coil, i do NOT know the internals for this one so if you want to go cheap be ready to experiment YOURSELF:
https://aliexpress.com/item/New-E-Cig...
quick connect wire:
https://aliexpress.com/item/led-strip...
zipties, silicon tube and solder should be readily available in any hardware store :)
my smoke fluid is fogjuice that you can buy for 5 dollar per liter, its the stuff that gets dumped into the smokemachines in the clubs and disco.
glycerine is also possible but its way thicker than fogjuice and harder for the wool in the coil to absorb, so burning is more risky.
my best results came to use a mix of 50%glycerine-50%fogjuice
my other videos:
Movable foam armor plating
3 most used glues for cosplay - with ...
Extracting 3d models for Templates - ...
How to Layer your foam armor details.
Unfolding 3d models in Pepakura
Extracting 3d models for Templates - ...
powerbank mod for cosplay electronics
remote controlled cosplay!
Easy hammered weathering for Foam armor
Video
Pepakura basics, cutting and building
Pepakura basics, Scaling and how to d...
Pepakura basics, how to use for your ...
E-cig/vapepen smoke-machine for cospl...
E-cig/vapepen smoke-machine for cospl...
7 سال پیش
در تاریخ 1396/10/01 منتشر شده
است.
53,209
بـار بازدید شده