Video 14: Installing servos and pushrods

Video 14 of the Millie Bob build - Installing the servos and building the pushrods which connect the servos to the control surfaces.

One piece of advice: This is a fiddly task. LOTS of patience is required, and even when you think it's finished you'll still have to trim a bit here and there to get it all working smoothly. Take your time and you'll get it done!

See Video 1 here - Video 1: Building an electric RC plan...
See Video 2 here - Video 2: Building an electric RC plan...
See Video 3 here - Video 3: Building an electric RC plan...
See Video 4 here - Video 4: Transferring from plans to b...
See Video 5 here - Video 5: Building an electric RC plan...
See Video 6 here - Video 6: Building an electric RC plan...
See Video 7 here - Video 7: Gluing the wing parts
See Video 8 here - Video 8: Completing the wing assembly
See Video 9 here - Video 9: Fuselage construction
See Video 10 here - Video 10: Assembling fuselage and und...
See Video 11 here - Video 11: Installing brushless motor,...
See Video 12 here - Video 12: Installing hinges for the c...
See Video 13 here - Video 13: Covering the RC plane using...

• #howto_style
• #rc_plane
• #radio_controoled_aeroplane
• #balsa
• #build_from_plans
• #rc_aeroplane
• #electric_rc
• #servos
• #installing_servos
• #pushrods
• #installing_pushrods
• #connecting_control_surfaces
• #rc_connect_control_surfaces
• #engine_nacelle
• #rc_nosecone
• #millie_bob