Shaft rotation limiter 6
10.9 هزار بار بازدید -
12 سال پیش
-
Pinned disks limit shaft turns
Pinned disks limit shaft turns to (N+1).α/360, where
N is the number of idle disks,
α is angle depending on pin diameter and distance between pin center and shaft center.
For this limiter: 7 idle disks allow shaft to rotate 7.1 turns.
There is a friction clutch between the driving pulley and the shaft.
The mechanism can be used for winding springs. The red wire on the left shows how to clamp the wire end for winding springs
N is the number of idle disks,
α is angle depending on pin diameter and distance between pin center and shaft center.
For this limiter: 7 idle disks allow shaft to rotate 7.1 turns.
There is a friction clutch between the driving pulley and the shaft.
The mechanism can be used for winding springs. The red wire on the left shows how to clamp the wire end for winding springs
12 سال پیش
در تاریخ 1391/07/23 منتشر شده
است.
10,915
بـار بازدید شده