Yaesu FT-DX10 Setup N1MM CW Computer CAT Menu Control for Contesting
20.9 هزار بار بازدید -
4 سال پیش
-
As an Amazon Associate I
As an Amazon Associate I earn from qualifying purchases.
🔥 TekPower: 13.8V Power amzn.to/2SQeF0T
🔥 G5RV Antenna: amzn.to/2FuCmrR
🔥 Yaesu FT-991A: amzn.to/42PuOaM
🔥 Bioenno Solar Panel: amzn.to/2BUZMmC
🔥 Bioenno Battery 12V,12Ah: amzn.to/2BUibjB
Chapters:
00:00 Intro & Explanation
01:38 Reset Radio & Start Radio Setup
04:19 Yaesu Site, Files and Documentation
07:22 Setup N1MM Configuration
Yaesu FT-DX10 ~ Setup N1MM ~ CW Computer CAT Menu Control Settings
New Yaesu compact HF and 50 MHz 100W SDR Transceiver available in December 2020.
Functionalities of the top line models in a smaller form factor transceiver. FTDX10 is going to utilize the Yaesu Hybrid SDR Configuration.
FTDX10 Price has been announced by Yaesu Dealers in Europe and Canada but not yet in USA since still missing for FCC Approval.
FT DX 10 Features
15 separate band pass filters
Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR)
High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2
Aluminum Heat Sink with 80mm low-noise axial flow cooling fan
High Speed Automatic Antenna Tuner with a large capacity 100-channel memory
RF & AF Transmit Monitor
Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode)
QMB (Quick Memory Bank)
Band Stack Function
Optional speaker – SP-30 designed for the new FTDX10
Optional roofing filter (300Hz) – XF-130CN available
Hybrid SDR Configuration
Like the FTDX101 series, the new FTDX10 utilizes the Yaesu Hybrid SDR configuration – Narrow Band SDR and Direct Sampling SDR. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope.
Narrow Band SDR
Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics
Like the FTDX101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted. It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor. Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more, and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more, in the 14MHz band at 2kHz separation.
FT-DX10The New Yaesu FT DX 10 HF / 50 MHz Transceiver
High Resolution Direct Digital Synthesizer
250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception
The local circuit of the new FTDX10 uses 250MHz HRDDS method same as the FTDX101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145dB or less in 14MHz at 2kHz separation.
3-Dimensional Spectrum Stream
3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel Functionality
The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed, and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTDX101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.
Front Panel
Front Panel Designed for Superior Operating Efficiency
Front Panel Designed for Superior Operating Efficiency MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.
Remote Operations
Remote Operation with optional LAN unit (SCU-LAN10)
Remote operation of the new FTDX10 is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operation such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network.
FTDX10 HF/50MHz band 100W Transc
4 سال پیش
در تاریخ 1399/12/25 منتشر شده
است.
20,949
بـار بازدید شده