[EP11] Fibreglass Boat Transom Replacement From The Outside
226.1 هزار بار بازدید -
3 سال پیش
-
Nearing the time of sale
Nearing the time of sale of my beloved Haines I discovered the transom had water ingress and rot especially around the engine bolt holes and rear well drain holes due to a poor design. I replace the transom from the rear using marine plywood and variety of methods and tricks I researched and thought up myself.
This series features the semi restoration of a very cheap Haines Signature 530F in need of a lot of work. It aims to educate people on how to perform good quality, but very budget orientated repairs and modifications to all things mechanical especially boat building.
This series features the semi restoration of a very cheap Haines Signature 530F in need of a lot of work. It aims to educate people on how to perform good quality, but very budget orientated repairs and modifications to all things mechanical especially boat building.
3 سال پیش
در تاریخ 1400/03/02 منتشر شده
است.
226,105
بـار بازدید شده