How to Lay Out and Square Metal Roofing Panels
69.8 هزار بار بازدید -
4 سال پیش
-
How wide should your first
How wide should your first metal roofing panel be and how do you make sure the rest of the panels are square going across the roof?
**********************************
Installing your first metal roofing panel on a project isn't as simple as fastening any panel onto the deck; it takes preparation. Today on The Metal Roofing Channel, Sheffield Metals Weathertight Warranty Inspector Jason Ayres details how to lay out your panels based on flashings, penetrations, desired look, and more. He also uses formulas and practical examples to explain how to install panels square and uniform across the entire roof.
Topics Covered:
►Intro 00:00
►How to layout panels 3:06
►How to square panels 5:02
Always remember to follow manufacturer's installation guidelines.
Please note the installation details and methods shown in this video are for reference only. Sheffield Metals recommends following their published installation details or for WTW projects following the required details issued and marked approved for that specific project.
**********************************
FOLLOW THE SHEFFIELD METALS TEAM
►www.linkedin.com/company/sheffield-metals-internat…
►www.facebook.com/sheffieldmetals/
Visit Our Website: hubs.ly/H0bFCn60
Subscribe To Our Blog: hubs.ly/H0bFYvX0
4 سال پیش
در تاریخ 1399/07/02 منتشر شده
است.
69,833
بـار بازدید شده