PCB Delayering: Sandpaper (Time lapse)
2.3 هزار بار بازدید -
9 سال پیش
-
Raw video from our PCB
Raw video from our PCB Deconstruction Techniques research: http://www.grandideastudio.com/portfo...
Delayering a multi-layer printed circuit board via manual abrasion. 60/80 grit rubbing stone and 60 grit sandpaper on a Norton Sheet Sander tool. This is a time lapse video of a process that took approximately 20 minutes. We were able to expose the inner copper layer with only minimal wearing along the edges (due to uneven sanding pressure).
Delayering a multi-layer printed circuit board via manual abrasion. 60/80 grit rubbing stone and 60 grit sandpaper on a Norton Sheet Sander tool. This is a time lapse video of a process that took approximately 20 minutes. We were able to expose the inner copper layer with only minimal wearing along the edges (due to uneven sanding pressure).
9 سال پیش
در تاریخ 1393/12/13 منتشر شده
است.
2,326
بـار بازدید شده