Zircon StudSensor HD55 Edge Finding Stud Finder
223.4 هزار بار بازدید -
10 سال پیش
-
Zircon StudSensor HD55 quickly and
Zircon StudSensor HD55 quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings up to 1 1/2 inches deep. Features two stud scan modes to find the edges of wood and metal studs to securely anchor mirrors, shelves, and cabinets to the wall. WireWarning® detection indicates the presence of live AC voltage. The new translucent red base, illuminated "V" marker groove, and SpotLite® Pointer makes for more accurate marking of stud edge location.
* Not recommended for lath & plaster walls *
* Indoor Use Only *
For more information about Zircon stud finders and other products:
https://www.zircon.com/tools/studsens...
Instagram: zircontools
Facebook: ZirconTools
Twitter: zircontools
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. *
https://www.zircon.com/2014/06/11/how...
1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays)
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (41 – 61 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
* Not recommended for lath & plaster walls *
* Indoor Use Only *
For more information about Zircon stud finders and other products:
https://www.zircon.com/tools/studsens...
Instagram: zircontools
Facebook: ZirconTools
Twitter: zircontools
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. *
https://www.zircon.com/2014/06/11/how...
1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays)
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (41 – 61 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
10 سال پیش
در تاریخ 1393/05/20 منتشر شده
است.
223,496
بـار بازدید شده