How to Replace Thermostat Housing 2008-2012 Honda Accord
32.9 هزار بار بازدید -
2 سال پیش
-
Shop for New Auto Parts
Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/166/9/thermostat-hou...
This video shows you how to install a thermostat housing on your 2008-2012 Honda Accord. The thermostat housing holds the thermostat, which regulates coolant flow in your vehicle's engine. If the housing is damaged or leaking, that can cause problems.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• Pry Bar http://1aau.to/obE/1AXAA00020
• 10mm Wrench http://1aau.to/obI/1AXAA00010
• 10mm Socket http://1aau.to/ofG/1AXAA00017
• 12mm Socket http://1aau.to/ogB/1AXAA00015
• Coolant Funnel Set
• Trim Tool Set http://1aau.to/obZ/1AXXX00006
• Needle nose pliers http://1aau.to/oaI/1AXAA00051
• Needle nose pliers http://1aau.to/oaI/1AXAA00052
• Pliers
• 1/4 Inch Socket http://1aau.to/oh/1AXAA00018
• Ratchet http://1aau.to/ohj/1AXAA00016
• Socket Extensions http://1aau.to/ogB/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/od8/1AXAA00044
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oaC/1AXSS00035
• Drain Pan
• Pick http://1aau.to/oa9/1AXAA00037
• Rubber Mallet
Subscribe: @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: Honda Accord 2008-12 8th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
This video shows you how to install a thermostat housing on your 2008-2012 Honda Accord. The thermostat housing holds the thermostat, which regulates coolant flow in your vehicle's engine. If the housing is damaged or leaking, that can cause problems.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• Pry Bar http://1aau.to/obE/1AXAA00020
• 10mm Wrench http://1aau.to/obI/1AXAA00010
• 10mm Socket http://1aau.to/ofG/1AXAA00017
• 12mm Socket http://1aau.to/ogB/1AXAA00015
• Coolant Funnel Set
• Trim Tool Set http://1aau.to/obZ/1AXXX00006
• Needle nose pliers http://1aau.to/oaI/1AXAA00051
• Needle nose pliers http://1aau.to/oaI/1AXAA00052
• Pliers
• 1/4 Inch Socket http://1aau.to/oh/1AXAA00018
• Ratchet http://1aau.to/ohj/1AXAA00016
• Socket Extensions http://1aau.to/ogB/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/od8/1AXAA00044
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oaC/1AXSS00035
• Drain Pan
• Pick http://1aau.to/oa9/1AXAA00037
• Rubber Mallet
Subscribe: @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: Honda Accord 2008-12 8th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/05/21 منتشر شده
است.
32,948
بـار بازدید شده