How to Rebuild Broken Leaking Floor Jack | Hydraulic Jack Oil Change | Jack Won't Lift
67.4 هزار بار بازدید -
4 سال پیش
-
Replacing the seals and changing
Replacing the seals and changing the jack oil on my Harbor Freight (US General) Floor Jack and Craftsman Floor Jack. Both jacks were leaking or didn't hold any pressure when under load. Had to figure out which seals were bad and changed them. Replaced the oil with some Bars Jack Oil with Stop Leak.
Bar's Jack Oil: https://amzn.to/3l90IJb
Viton O-ring Kit (better than ones I used) - https://amzn.to/3irkNsr
Viton are don't expand and are oil resistant. I used regular Nitrile O-rings which will deteriorate quicker.
Jack Puck with slit: https://amzn.to/3kGRBQD
Jack Metal mount: https://amzn.to/2PQMP52
-------------------------
Support the Patreon: Patreon: tunerwithkids
Merch Available: https://teespring.com/stores/tuner-wi...
Follow Me on IG: Instagram: tuner_with_kids
For questions and inquiries: [email protected]
-------------------------
#floorjack #hydraulicjack #howto
0:00 Jacks
2:35 Harbor Freight Jack Rebuild
7:05 US General Seal/O-Ring Change
9:25 Fill New Jack Oil
12:25 Craftsman Jack Rebuild
15:25 Craftsman Seal/O-Ring Change
17:05 Fill New Jack Oil
19:10 Testing Jacks on Car/Van
Disclaimer: "Tuner with Kids", the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.
Bar's Jack Oil: https://amzn.to/3l90IJb
Viton O-ring Kit (better than ones I used) - https://amzn.to/3irkNsr
Viton are don't expand and are oil resistant. I used regular Nitrile O-rings which will deteriorate quicker.
Jack Puck with slit: https://amzn.to/3kGRBQD
Jack Metal mount: https://amzn.to/2PQMP52
-------------------------
Support the Patreon: Patreon: tunerwithkids
Merch Available: https://teespring.com/stores/tuner-wi...
Follow Me on IG: Instagram: tuner_with_kids
For questions and inquiries: [email protected]
-------------------------
#floorjack #hydraulicjack #howto
0:00 Jacks
2:35 Harbor Freight Jack Rebuild
7:05 US General Seal/O-Ring Change
9:25 Fill New Jack Oil
12:25 Craftsman Jack Rebuild
15:25 Craftsman Seal/O-Ring Change
17:05 Fill New Jack Oil
19:10 Testing Jacks on Car/Van
Disclaimer: "Tuner with Kids", the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.
4 سال پیش
در تاریخ 1399/07/12 منتشر شده
است.
67,479
بـار بازدید شده