Baileigh TN-250 Tubing Notcher - Trick-Tools.com
3.8 هزار بار بازدید -
3 سال پیش
-
See it here:
See it here: www.trick-tools.com/Baileigh_TN_250_Hole_Saw_Tube_…
The TN-250 is one of the most versatile hole saw notchers on the market today. The unique radial vise clamping system allows for clamping tubing from 1/2 inch to 2-1/2 inch OD in any location, including the center of a bend. Hole saws are supported on a massive 1-1/4 inch OD shaft, which also includes a replaceable hex insert for attaching to a standard 1/2 inch drive drill.
Offset copes of up to 1 inch can be accomplished by raising or lowering the cutter assembly. This notcher also allows for the use of 3-inch deep hole saws for making longer cuts in a single pass.
Other features include:
- Capacity of 1/2 to 2-1/2 inch OD
- 230 degrees of angle adjustment
- All CNC machined
- Radial vise allows for clamping in the center of a bend
- Can offset notch up to 1 inch vertically
- 1-1/4 inch ground and polished stainless steel shaft
- Sealed needle bearing shaft support
- Easy mounting: Bolt it to a table or simply clamp it in a vise
- Can use 3 inch deep hole saws
- Requires an ordinary 1/2 inch hand drill
Warranty: 1 year manufacturer's warranty
Trick-Tools.com
[email protected]
1.877.VAN.SANT
3 سال پیش
در تاریخ 1400/06/29 منتشر شده
است.
3,807
بـار بازدید شده