Carbon Winch Install || Cab Isolation via 500A Solenoid & IN/OUT Control Wiring
1.7 هزار بار بازدید -
2 سال پیش
-
In this video I will
In this video I will show you how to install a Carbon 12K winch. I will explain winch install into ARB bull bar, isolation circuit via 500 amp solenoid and wiring a winch switch in and out.
You'll see how to connect to the Carbon winch solenoids inside the control box, how to wire it all up and other install tips related to the Carbon winch install and winches in general that you want to isolate using a large solenoid and control with a winch momentary in/out switch.
|| Carbon 12k V3 ||
geni.us/tbt-carbon-12k-v3
|| Other 4WD Winches ||
geni.us/tbt-4x4-winches
|| CARBON 12K V2 WINCH || -- May be sold out now.
geni.us/tbt-carbon-12k-winch
|| STINGER SGP35 500 AMP SOLENOID ||
geni.us/tbt-stinger-sgp35-500a
|| NARVA 7-PIN WINCH SWITCH ||
geni.us/tbt-winch-switch
⋄⋄⋄ TOOLS & EQUIPMENT ⋄⋄⋄
▻ Socket & spanner set: geni.us/bahco-S106-socket-set
▻ 1/2" Torque Wrench: geni.us/tbt-torque-wrench-nm
▻ Wire strippers: geni.us/tbt-wire-stripper-tool
▻ Crimpers: geni.us/tbt-multihead-crimper
▻ Loctite 243: geni.us/tbt-loctite-243
▻ Allen keys: geni.us/tbt-allen-keys
=== GEAR I USE TO FILM AND EDIT ===
–– CAMERAS & LENSES ––
▻ Camera 1: geni.us/tbt-sony-alpha-a1
▻ Camera 2: geni.us/tbt-sony-a7iv
▻ Wide Angle Prime: geni.us/tbt-sony-24-gm-prime
▻ Nifty Fifty: geni.us/tbt-sony-fe-55mm-f18
▻ Wide Angle Zoom: geni.us/tbt-sony-16to35mm-f4
▻ Drone: geni.us/tbt-dji-mavic-3-flym
▻ Action Camera: geni.us/tbt-gopro-hero-10
–– AUDIO ––
▻ Wireless Recorder: geni.us/tbt-rode-wireless-go-2
▻ Sound Recorder: geni.us/tbt-zoom-h1n
▻ Shotgun Mic (studio): geni.us/tbt-rode-videomic-ntg
▻ Lavalier Microphone: geni.us/tbt-rode-lavalier-go
▻ GoPro Mic: geni.us/tbt-hero10-media-mod
–– EDITING ––
▻ Laptop: geni.us/tbt-macbookpro-m1max
▻ Monitor 1: geni.us/tbt-dell-u2720q
▻ Monitor 2: geni.us/tbt-benq-ew3270u
▻ Mouse: geni.us/tbt-logitech-mxmaster3
▻ Keyboard: geni.us/tbt-logitech-mx-keys
▻ Trackpad: geni.us/tbt-magic-trackpad
▻ SD Card Reader: geni.us/tbt-satechi-cardreader
–– LIGHTING ––
▻ Key Light: geni.us/tbt-aputure-p60c
▻ Fill Light: geni.us/tbt-neewer-660led
▻ Travel Light: geni.us/tbt-aputure-mc
▻ GoPro Light: geni.us/tbt-gopro-light-mod
–– ACCESSORIES & MOUNTS ––
▻ Camera Bag 1: geni.us/tbt-shimoda-action-x50
▻ Camera Bag 2: geni.us/tbt-shimoda-explore-35
▻ Gimbal: geni.us/tbt-zhiyun-weebill-s
▻ Drone Controller: geni.us/tbt-dji-rc-pro
▻ Tripod (Travel): geni.us/tbt-3lt-brian-tripod
▻ Tripod (Studio): geni.us/tbt-tripod-kfconcept
▻ Colour Checker: geni.us/tbt-xritepassportvideo
▻ SD Card Case: geni.us/tbt-memorycard-case
▻ Camera Sling: geni.us/tbt-sling-peakdesign
▻ Accessory Pouch: geni.us/tbt-shimoda-accessory
▻ ND Filters: geni.us/tbt-freewell-nd-magnet
▻ GoPro Suction: geni.us/gopro-suction-mount
▻ GoPro Magnetic Clip: geni.us/tbt-gopro-swivelmagnet
=== TABLE OF CONTENTS ===
00:00 - What this video covers.
01:04 - Why I bought the Carbon 12K winch.
01:35 - Carbon 12K vs Runva 11XP comparison.
03:52 - Why I wanted to save as much weight as possible.
04:44 - 500 amp isolating solenoid.
05:07 - The Carbon 12K winch does not fit into the ARB deluxe bull bar without removing bolts.
05:50 - Initial product weights.
06:19 - What's in the box!?!?
07:32 - How to change the clutch position.
10:20 - How to mount Carbon 12K winch and fairlead into ARB bull bar.
12:15 - Raise winch to avoid sharp edges.
12:32 - Check bolts aren't bottoming out but have full thread engagement.
13:43 - Control box mounting and wiring to motor terminals.
15:45 - Cutting the Mazda BT-50 grill, cable tie in & short negative cable.
16:55 - Solenoid mounting, switches, power draw testing.
17:51 - Solenoid terminal cover.
18:35 - Isolating solenoid wiring diagram.
19:10 - How to connect Carbon winch control box to in-cab control winch switch.
21:00 - Winch testing, in-cab controls, isolator switch, power draw of control box solenoids.
22:00 - Control box clearance issue.
22:57 - Re-wrapping the winch rope (not proper load winding).
24:00 - How to install Carbon winch hook.
24:44 - Winch wiring complete diagram overview.
25:42 - Weights added to the car.
26:18 - Install thoughts & price list.
29:18 - Mazda BT-50 build costs & weights.
|| ALSO ACTIVE ON ||
◦ Website: thebrownetown.com/
◦ Instagram: www.instagram.com/thebrownetown/
|| FOR THOSE WHO CHOOSE TO DONATE ||
▻ paypal.me/TheBrowneTown
**Disclosure
Links are affiliate links. Through partnerships with Amazon, eBay and others I earn a small commission from purchases made through these links. There are no extra costs for you but it does help support the channel in a small way.
2 سال پیش
در تاریخ 1401/12/16 منتشر شده
است.
1,731
بـار بازدید شده