MKS Gen 1.4 - Dual Z steppers with Marlin firmware (Part one)
36.9 هزار بار بازدید -
5 سال پیش
-
This is a simple tutorial
This is a simple tutorial on how to use Marlin firmware to create a second z-axis stepper motor.
buymeacoffee:
www.buymeacoffee.com/ebraiman
Hardware:
2 - NEMA 17 stepper motors
2 - A4988 stepper boards
1 - MKS Gen v1.4
1 - Serial cable
1- 12 v PSU
Software:
Marlin Firmware 2.0.x
marlinfw.org/meta/download/
Installing PlatformIO on Atom for Marlin Firmware
marlinfw.org/docs/basics/install_platformio.html
Pronterface:
www.pronterface.com/
5 سال پیش
در تاریخ 1398/04/04 منتشر شده
است.
36,932
بـار بازدید شده