Fix Boot Loop BIOS Gigabyte Motherboard after setting in One Minute
207.5 هزار بار بازدید -
5 سال پیش
-
This video How to Fix
This video How to Fix boot loop computer on off on off after change BIOS setting with Gigabyte Motherboard
Similar like Boot Loop or Post Loop
00:00 Setting Gigabyte motherboard, look normal
00:05 After boot, Computer Boot Loop. On off on off on off non-stop. Check memory DRAM, Reset BIOS, Check CPU, But nothing can fix boot loop. Think The last you doing from Computer. Everybody will get this problem. How to fix Boot Loop Dual BIOS Gigabyte Motherboard
00:16 Unplug any hardware (recommended), only Monitor and Keyboard
00:24 Press Power Button, but HOLD. Computer will start, after a few second. Wait until computer back Off, and release Power Button.
00:34 Press Power Button again
00:35 Computer motherboard will update BIOS Corrupt automatic. Wait until finish and computer will turn off
00:47 Now Press Power On again
On screen will show BIOS Has Been Reset
You can setting again, or load default what ever.
Process recovery dual BIOS finish
This Method One video, how to fix BIOS Boot Loop for Gigabyte Motherboard
Method #1:
1. Shut your PC down
2. Hold the power button until the PC starts and shuts down again
3. Press the power button again, your backup BIOS should kick in now and should re-flash the main BIOS if there's anything wrong with it.
Method #2:
1. Shut your PC down
2. Hold the power AND the reset button for about 10 sec, than release.
3. Backup BIOS should kick in anytime soon now.
Method #3:
Backup BIOS kicked in using method #2, but I was back to the good ol' no signal state once the procedure finished..
1. Short out pins 1 and 6 on the main BIOS chip (pin #1 should be marked with a red dot or whatever)
2. Tell a friend (or a relative) of yours to press the power on button
3. Remove the ghetto-like jumper you're holding between pins 1 and 6 as soon as you hear a beep.
4. Backup BIOS should kick in again and everything will (hopefully) be fine.
About Method 3. We don't want talk to much. Search via Google, and look and where the pin on BIOS pin marker.
Similar like Boot Loop or Post Loop
00:00 Setting Gigabyte motherboard, look normal
00:05 After boot, Computer Boot Loop. On off on off on off non-stop. Check memory DRAM, Reset BIOS, Check CPU, But nothing can fix boot loop. Think The last you doing from Computer. Everybody will get this problem. How to fix Boot Loop Dual BIOS Gigabyte Motherboard
00:16 Unplug any hardware (recommended), only Monitor and Keyboard
00:24 Press Power Button, but HOLD. Computer will start, after a few second. Wait until computer back Off, and release Power Button.
00:34 Press Power Button again
00:35 Computer motherboard will update BIOS Corrupt automatic. Wait until finish and computer will turn off
00:47 Now Press Power On again
On screen will show BIOS Has Been Reset
You can setting again, or load default what ever.
Process recovery dual BIOS finish
This Method One video, how to fix BIOS Boot Loop for Gigabyte Motherboard
Method #1:
1. Shut your PC down
2. Hold the power button until the PC starts and shuts down again
3. Press the power button again, your backup BIOS should kick in now and should re-flash the main BIOS if there's anything wrong with it.
Method #2:
1. Shut your PC down
2. Hold the power AND the reset button for about 10 sec, than release.
3. Backup BIOS should kick in anytime soon now.
Method #3:
Backup BIOS kicked in using method #2, but I was back to the good ol' no signal state once the procedure finished..
1. Short out pins 1 and 6 on the main BIOS chip (pin #1 should be marked with a red dot or whatever)
2. Tell a friend (or a relative) of yours to press the power on button
3. Remove the ghetto-like jumper you're holding between pins 1 and 6 as soon as you hear a beep.
4. Backup BIOS should kick in again and everything will (hopefully) be fine.
About Method 3. We don't want talk to much. Search via Google, and look and where the pin on BIOS pin marker.
5 سال پیش
در تاریخ 1398/08/24 منتشر شده
است.
207,518
بـار بازدید شده