Simplex 4010 and 4003 Voice Evacuation System Test 1
38.6 هزار بار بازدید -
6 سال پیش
-
Here is my Simplex 4010
Here is my Simplex 4010 / 4003 Voice Evac system I have set up on my alarm demonstration wall. The system works by when the 4010 goes into alarm, NAC 1 on the 4010 trips the contact closure on the 4003 activating the speakers. When the silence button is pressed NAC 1 shuts off and silences the speakers. While NAC 2 is set for SQAlert which provides smart sync for all TrueAlerts connected to the panel. Strobes will continue to flash until the system is reset. The system consists of two 4099-9001 pull stations and 2 4098-9714 smoke sensors. The speaker is a Simplex 4903-9357 set to smart sync operation.
Please leave a like and subscribe for future content!
Thanks for viewing!
Please leave a like and subscribe for future content!
Thanks for viewing!
6 سال پیش
در تاریخ 1397/02/07 منتشر شده
است.
38,674
بـار بازدید شده