How to install a suspension lift in your driveway | Toyota Tacoma

TacomaBeast
TacomaBeast
121.5 هزار بار بازدید - 3 سال پیش - Follow along as we show
Follow along as we show you how to install BP-51 OME Suspension Lift in Dustin's Driveway.

Suspension installed in this video - https://bit.ly/3xUAEtZ

How to install Leaf Springs on Your Toyota Tacoma - How to Install Tacoma Leaf Spring + H...

Support our channel by grabbing some sweet merchandise:
https://bit.ly/2YVqPew

We are your one-stop-shop for everything Tacoma
Explore your options- http://bit.ly/2RnxLvH

Follow us on Instagram:
@TacomaBeast - http://bit.ly/2KiDPow

Tools we used:
3/8" end wrench
10mm end wrench
9/16" end wrench
14mm end wrench
17mm end wrench
19mm end wrench
7/8" end wrench
3/8"drive ratchet
10mm Socket
14mm Socket
21mm Socket
9/16" Socket
13/16" Socket
1/2" Drive Ratchet
Standard 3" extension
Dead Blow Hammer or rubber mallet
Lineman Dikes
Hydraulic floor jack
Jack stands
Breaker bar

Table of Contents / Chapter Markers
Intro - 0:10
Tools Required 0:20
Properly lifting the front - 0:30
Remove Old Front Shocks - 1:22
Install Old Man Emu BP-51 Kit - 4:37
Install Front BP-51 Reservoir - 6:47
Properly lifting the back - 9:08
Remove Old Rear Shocks - 9:49
Install Rear Old Man Emu BP-51 Socks - 10:33
Install Rear Front BP-51 Reservoir - 13:15
3 سال پیش در تاریخ 1399/11/19 منتشر شده است.
121,560 بـار بازدید شده
... بیشتر