Clean Idle Air Control Valve & Throttle With Minimum Removal Honda Accord
779.3 هزار بار بازدید -
12 سال پیش
-
How do you Clean Idle
How do you Clean Idle Air Control Valve & Throttle for Honda Accord without removing a lot of parts? This is for a Honda Accord 2005 and earlier, 4 cylinder engine (mine is 2004 Accord). It saves time without removing a lot of parts that the book suggest to remove, but you need to pay attention for a couple of things. I did not remove 5 components, did not remove hoses so that no need to clean the spill, or break the hoses; did not remove cables not only saved removal time, but also I did not have to spend the time to adjust these cables.
Index
0:00 Clean Idle Air Control Valve & Throttle
0:31 tools needed
1:16 throttle body and IAC unit removal involves a lot of parts
1:36 minimize removal, don't follow manual
1:56 not remove intake duct
2:16 not remove vacuum hose
2:38 not remove coolant hose, not accelerator cable, not cruise control cable
3:07 disconnect battery to reset computer
3:51 tagging components
4:36 remove intake air temperature gauge
4:56 remove throttle position sensor
5:21 loosen screw optionally remove intake duct
5:48 intake air bypass hose
6:30 remove air filter
7:04 coolant hose will spill
7:38 remove IAC valve control electrical connector
8:48 not disconnect 5 components, hoses/cables
9:20 remove throttle and IAC
9:54 remove idle control valve
10:25 clean throttle
11:07 clean idle control valve IAC
12:00 rubber sealer may fall off
12:48 tight hose
13:08 connect battery and re-train computer
You also need to perform the PCM re-learn procedure PCM Idle Learn Procedure for Honda Ac...
My car's problem started with the idle speed fluctuation see Idle Speed Fluctuates & Many Possible.... After I replaced the coolant see How to Replace Coolant For Honda Accord, it run perfectly for a week until the problem came back see Solution For Collapsed Coolant Hose I.... I then fixed the radiator cap problem, it run perfectly for another week. Now after I cleaned the throttle & IAC valve, the car run perfectly again.
http://cartrek.com/clean-idle-air-con...
http://cartrek.com/absolute-minimal-r...
http://cartrek.com/various-options-to...
http://cartrek.com/idle-speed-fluctua...
http://cartrek.com/pcm-idle-learn-pro...
Index
0:00 Clean Idle Air Control Valve & Throttle
0:31 tools needed
1:16 throttle body and IAC unit removal involves a lot of parts
1:36 minimize removal, don't follow manual
1:56 not remove intake duct
2:16 not remove vacuum hose
2:38 not remove coolant hose, not accelerator cable, not cruise control cable
3:07 disconnect battery to reset computer
3:51 tagging components
4:36 remove intake air temperature gauge
4:56 remove throttle position sensor
5:21 loosen screw optionally remove intake duct
5:48 intake air bypass hose
6:30 remove air filter
7:04 coolant hose will spill
7:38 remove IAC valve control electrical connector
8:48 not disconnect 5 components, hoses/cables
9:20 remove throttle and IAC
9:54 remove idle control valve
10:25 clean throttle
11:07 clean idle control valve IAC
12:00 rubber sealer may fall off
12:48 tight hose
13:08 connect battery and re-train computer
You also need to perform the PCM re-learn procedure PCM Idle Learn Procedure for Honda Ac...
My car's problem started with the idle speed fluctuation see Idle Speed Fluctuates & Many Possible.... After I replaced the coolant see How to Replace Coolant For Honda Accord, it run perfectly for a week until the problem came back see Solution For Collapsed Coolant Hose I.... I then fixed the radiator cap problem, it run perfectly for another week. Now after I cleaned the throttle & IAC valve, the car run perfectly again.
http://cartrek.com/clean-idle-air-con...
http://cartrek.com/absolute-minimal-r...
http://cartrek.com/various-options-to...
http://cartrek.com/idle-speed-fluctua...
http://cartrek.com/pcm-idle-learn-pro...
12 سال پیش
در تاریخ 1391/10/09 منتشر شده
است.
779,353
بـار بازدید شده