SBC Piston Ring and Rod Orientation (For the First time Builders)
260.7 هزار بار بازدید -
3 سال پیش
-
I was asked a few
I was asked a few times after the last video about Piston Ring ring gap orientation aka "Clocking" so here's a video that should help out you first time engine builders!
Ring Install on basic SBC pistons!
Ring orientation is another thing that everyone does differently, I've done it the CP carrillo piston way for years and have had good luck with leak downs and oil control.
Plus a tip on making sure your rods are facing the right direction, a very common mistake!
Feel Free to Comment below if you have any questions! and don't forget to like and Subscribe!
Piston ring installer:
https://amzn.to/3VeNDBO
Piston ring File (Basic)
https://amzn.to/3yV2lXj
Ring Install on basic SBC pistons!
Ring orientation is another thing that everyone does differently, I've done it the CP carrillo piston way for years and have had good luck with leak downs and oil control.
Plus a tip on making sure your rods are facing the right direction, a very common mistake!
Feel Free to Comment below if you have any questions! and don't forget to like and Subscribe!
Piston ring installer:
https://amzn.to/3VeNDBO
Piston ring File (Basic)
https://amzn.to/3yV2lXj
3 سال پیش
در تاریخ 1400/03/30 منتشر شده
است.
260,766
بـار بازدید شده