How to Replace O2 Oxygen Sensor Downstream 2006-2013 Chevrolet Impala
57.4 هزار بار بازدید -
2 سال پیش
-
Buy Now!
New O2 Oxygen
Buy Now!
New O2 Oxygen Sensor from 1AAuto.com 1aau.to/ia/1AEOS00248
This video shows you how to install a downstream oxygen (O2) sensor on your 2006-2013 Chevrolet Impala. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
This process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oeN/1AXAA00013
• 22mm Wrench
• Trim Tool Set 1aau.to/obk/1AXXX00006
• Pliers
• 7/8 Inch Wrench 1aau.to/oC/1AXAA00011
• Rust Penetrant
• Pick 1aau.to/oay/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Chevrolet Impala 2006-2013 9th Generation: • Chevrolet Impala 2006-2013 9th Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/04/20 منتشر شده
است.
57,409
بـار بازدید شده