Backing up setting parameters & PMC parameters from Fanuc 18-TB to PC. CNC Digital, Inc.
15.3 هزار بار بازدید -
5 سال پیش
-
How to save your setting
How to save your setting parameters and PMC parameters on a Fanuc 18-TB control to your PC.
1. Get PC software ready to receive parameters.
2. Machine in Edit Mode
3. make sure the edit key is protect off position.
4. Press system (hard key) then [PARAM] soft key.
5. Press [OPRT] soft key (operation).
6. Press right arrow soft key.
7. Press [PUNCH] soft key.
8. Press [EXEC] soft key.
Link to CADEM free dnc for 1 machine.
https://www.cadem.com/free-dnc-software
1. Get PC software ready to receive parameters.
2. Machine in Edit Mode
3. make sure the edit key is protect off position.
4. Press system (hard key) then [PARAM] soft key.
5. Press [OPRT] soft key (operation).
6. Press right arrow soft key.
7. Press [PUNCH] soft key.
8. Press [EXEC] soft key.
Link to CADEM free dnc for 1 machine.
https://www.cadem.com/free-dnc-software
5 سال پیش
در تاریخ 1398/10/16 منتشر شده
است.
15,355
بـار بازدید شده