How to install Android 10 Head Unit Car Radio (with rear view camera) VW Golf Passat B6 B7 CC Skoda

TUTORIALE AUTO
TUTORIALE AUTO
32.9 هزار بار بازدید - 2 سال پیش - Here is a video tutorial
Here is a video tutorial on how to install Android 10.0 Head Unit Car Radio 9 inch (H589N-H) with rear view camera on VW Golf 5, Mk5, Golf 6, Mk6, GTI, Passat B6, B7, CC, Polo, Tiguan, Scirocco, Eos, Multivan, Beetle, Sharan,
Touran, Transporter T5, Amarok, Caddy, Skoda Fabia, Octavia 2, Octavia 3, Superb, Rapid, Yeti, Roomster, Seat Leon, Altea, Alhambra, Toledo, etc. in 12 easy steps.

HERE you can find Android 10.0 Head Unit Car Radio for VW, Skoda, Seat: https://bit.ly/3hqbkXW

HERE is Backup Camera Adapter Box: https://bit.ly/3Rvxfth

Required tools:
– T20 Torx: https://amzn.to/2DJ8yZT
– flat blade screwdriver or trim tool: https://amzn.to/3uy4FMd
– Backup Camera Adapter Box: https://bit.ly/3Rvxfth

The Android 10 Car Radio H589N-H includes:
- car radio
- 2 power harnesses (you'll use the one that is fitting for your car)
- radio antenna
- original car USB
- Canbus decoder
- RCA cable
- CAM cable for rear view camera
- 2 x USB cables
- GPS antenna

1. Remove the plastic frame from the car radio
2. Remove the cables from the airbag light from frame
3. Remove those 4 screws from the car radio using a T20 Torx
4. Take the Car Radio (RCD310 Head Unit) out and disconnect all the cables from the back
If your car has Logo Flip Rear Trunk Handle Camera, you should buy a Backup Camera Rearview RGB to Converter Adapter Box.
5. Connect the blue wire from the antenna to the blue wire from the power harness
How to connect the Logo Flip Rear Trunk Handle Camera to the Car Radio Unit Android 10.0
6. Connect the black wire from the Backup Camera Adapter Box to the black cables from the power harness
7. Connect the yellow and brown wires from the Backup Camera Adapter Box to the brown cable from the Canbus (it could be a pink wire also)
8. Connect the yellow cables from the Backup Camera Adapter Box to the CAM cable (CCD AVIN)
Don't forget to use tape to insolate the wires!
9. Place the GPS antenna on the top or radio cage, inside the center console
If you choose to use those USB cables, you can connect it to the car radio unit and then you can go behind the radio unit and  take them out through the left side corner of the glove compartment
10. Connect the radio antenna to the car antenna and the power harness to the main cables of the car
11. Put all the cables inside the center console and then put the 4 screws back
12. Connect the airbag cables and the place the plastic frame back.

READ THE COMPLETE ARTICLE HERE: https://bit.ly/3Gf8bnB

All about money that makes money. Change the game! 8 steps to know everything you need to know to get there! –- https://bit.ly/3sYgQDM

In this post you will find affiliate links, meaning if you click through an affiliate link and make a purchase, I could make a commission. Thank you!

If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!

More VIDEO TUTORIALS on http://www.servicetutorials.com
Follow us on INSTAGRAM: https://www.instagram.com/service_tut...
SUBSCRIBE our YOUTUBE channel: @servicetutorials

This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!

If you have any suggestions about new tutorials, please let us know in the comments section!
2 سال پیش در تاریخ 1401/10/02 منتشر شده است.
32,903 بـار بازدید شده
... بیشتر