Using old iMac as a Secondary Monitor Apparently No Longer Works
69.3 هزار بار بازدید -
3 سال پیش
-
Apparently, although the hardware obviously
Apparently, although the hardware obviously can support this, in Mac OS Monterey (and maybe earlier), Apple has taken away this feature.
There was an article: https://support.apple.com/guide/mac-h... that provided details on this but that article no longer exists.
Target Display Mode was not supported on iMac models with Retina display.
Only iMac (27-inch, Late 2009), iMac (27-inch, Mid 2010), and iMac (Mid 2011 to Mid 2014) supported Target Display Mode.
On an Apple Keyboard: Command-F2 would put your old iMac into Target Display Mode.
On an Anker Keyboard: Command-F3 would do the same.
old iMac into display mode!
Instead of buying the ridiculously expensive Apple cables, this $15 cable: https://amzn.to/2HlrZtR should work.
But of course, if you've upgraded your OS, none of this will work.
Using an old iMac as a Secondary Monitor No Longer Works
There was an article: https://support.apple.com/guide/mac-h... that provided details on this but that article no longer exists.
Target Display Mode was not supported on iMac models with Retina display.
Only iMac (27-inch, Late 2009), iMac (27-inch, Mid 2010), and iMac (Mid 2011 to Mid 2014) supported Target Display Mode.
On an Apple Keyboard: Command-F2 would put your old iMac into Target Display Mode.
On an Anker Keyboard: Command-F3 would do the same.
old iMac into display mode!
Instead of buying the ridiculously expensive Apple cables, this $15 cable: https://amzn.to/2HlrZtR should work.
But of course, if you've upgraded your OS, none of this will work.
Using an old iMac as a Secondary Monitor No Longer Works
3 سال پیش
در تاریخ 1400/10/21 منتشر شده
است.
69,375
بـار بازدید شده