1988-1995 OBS Chevrolet Truck LS Engine Swapped Budget Steering Shaft Project
35.4 هزار بار بازدید -
3 سال پیش
-
Part 14: The 1991 Chevy
Part 14: The 1991 Chevy OBS project truck like all OBS trucks could use some upgrades in the steering department. Without going crazy and trying to stay in our budget, I am upgrading the lower steering shaft with its spongy rag joint for a Jeep Cherokee unit that has universal joints. These universal joints eliminate the "slop" that is present in the Chevy rag joints. NOTE: Do your research if your truck is different, later OBS year trucks don't accept this modification because the steering shaft is designed differently than the earlier years.
If you enjoy the content of our videos, please hit the "LIKE" button, it helps us to provide the right content you want to see!
Several key takeaways:
1) The steering shaft is a near bolt in unit
2) If it makes you feel more comfortable, drill a single hole as shown in the video to place a nut and bolt through the hole in the Chevy upper steering shaft end. I did.
WE GOT SOME LAURENCEVILLE GARAGE SWAG AND DECALS!!
Check it out with this link....
https://saydesignsllc.com/collections...
You can use the link below to find PARTS and TOOLS used on this project that can be found on Amazon. We appreciate your support of the channel. Any items purchased through the provided links provides a small commission to the channel. Thank you and good luck with your project!
https://www.amazon.com/shop/laurencev...
Check us out on Facebook at www.facebook.com/laurencevillegarage
New item used in this video with links:
1) Steering Column Shaft for Jeep Cherokee XJ 1984-1994 w/Power Steering 4713943 $52.99
https://www.ebay.com/itm/363558504240
+ tax $4.37
sold the catalytic converter from the '91 and 1 good converter from the '01 Donor -$75
total -$17.64
Running total of $$ for project Shop Truck:
Part 1 Truck total price $1,308.00
Part 2 and 3 (control arms) $230.76
Part 4 Front brake/spindle rebuild $196.93
Part 5 Cost of Donor + parts sold $265.00
Part 6 Engine parts $438.93
Part 7 oil pan issues $45.04
Part 8 oil diverter $27.01
Part 9 Truck bed removal $00.00
Part 10 Rear suspension lowering/rebuild $226.84
Part 11 LS fuel pump/hose upgrade $99.99
Part 12 Rear disk brake conversion $544.16
Part 13 Pulling engine/trans + clutch/flywheel $316.47
Part 14 Steering shaft upgrade -$17.64
TOTAL PROJECT $4103.90
Disclaimer: This video is intended for entertainment use only, if in doubt as to your mechanical ability, consult a professional to perform the needed work.
Thank you for watching this video on the Laurenceville Garage channel, if you would like to help support this channel you can do so through the following links. Thank you!
Support the channel:
Venmo - LaurencevilleGarage
Email: [email protected]
If you enjoy the content of our videos, please hit the "LIKE" button, it helps us to provide the right content you want to see!
Several key takeaways:
1) The steering shaft is a near bolt in unit
2) If it makes you feel more comfortable, drill a single hole as shown in the video to place a nut and bolt through the hole in the Chevy upper steering shaft end. I did.
WE GOT SOME LAURENCEVILLE GARAGE SWAG AND DECALS!!
Check it out with this link....
https://saydesignsllc.com/collections...
You can use the link below to find PARTS and TOOLS used on this project that can be found on Amazon. We appreciate your support of the channel. Any items purchased through the provided links provides a small commission to the channel. Thank you and good luck with your project!
https://www.amazon.com/shop/laurencev...
Check us out on Facebook at www.facebook.com/laurencevillegarage
New item used in this video with links:
1) Steering Column Shaft for Jeep Cherokee XJ 1984-1994 w/Power Steering 4713943 $52.99
https://www.ebay.com/itm/363558504240
+ tax $4.37
sold the catalytic converter from the '91 and 1 good converter from the '01 Donor -$75
total -$17.64
Running total of $$ for project Shop Truck:
Part 1 Truck total price $1,308.00
Part 2 and 3 (control arms) $230.76
Part 4 Front brake/spindle rebuild $196.93
Part 5 Cost of Donor + parts sold $265.00
Part 6 Engine parts $438.93
Part 7 oil pan issues $45.04
Part 8 oil diverter $27.01
Part 9 Truck bed removal $00.00
Part 10 Rear suspension lowering/rebuild $226.84
Part 11 LS fuel pump/hose upgrade $99.99
Part 12 Rear disk brake conversion $544.16
Part 13 Pulling engine/trans + clutch/flywheel $316.47
Part 14 Steering shaft upgrade -$17.64
TOTAL PROJECT $4103.90
Disclaimer: This video is intended for entertainment use only, if in doubt as to your mechanical ability, consult a professional to perform the needed work.
Thank you for watching this video on the Laurenceville Garage channel, if you would like to help support this channel you can do so through the following links. Thank you!
Support the channel:
Venmo - LaurencevilleGarage
Email: [email protected]
3 سال پیش
در تاریخ 1400/09/29 منتشر شده
است.
35,443
بـار بازدید شده