ESP32: Webserver, Websockets and JSON (WiFi Part 2) - Arduino
79.1 هزار بار بازدید -
3 سال پیش
-
Part 2 focuses on how
Part 2 focuses on how to use the ESP32 to setup a webserver, configure websockets and use JSON for data exchange between the client and ESP32 server. Programming is done through the Arduino IDE.
For the code refer to:
https://github.com/mo-thunderz/Esp32W...
For part 1 of this series, refer to:
ESP32: WIFI Basics and sync to NTP cl...
Might you have problems programming the ESP32, pls refer to:
Programming ESP32: how its done and i...
In part 3 I will extend on the webserver and show how to control LEDs through a webserver:
ESP32: Control LEDs through a webserv...
For the code refer to:
https://github.com/mo-thunderz/Esp32W...
For part 1 of this series, refer to:
ESP32: WIFI Basics and sync to NTP cl...
Might you have problems programming the ESP32, pls refer to:
Programming ESP32: how its done and i...
In part 3 I will extend on the webserver and show how to control LEDs through a webserver:
ESP32: Control LEDs through a webserv...
3 سال پیش
در تاریخ 1400/06/18 منتشر شده
است.
79,147
بـار بازدید شده