14 Bolt Spindle Nut Torque
15.2 هزار بار بازدید -
3 سال پیش
-
Thanks to Smokeydabee Charles Coleman
Thanks to Smokeydabee Charles Coleman for sending me the proper torque procedure for the spindle nut. First torque to 50 ft/lbs while spinning the hub. Loosen, then retighten to 35ft/lbs. Then advance to the next slot in the spindle nut to insert the key. Please like and subscribe for more videos. Thanks for watching!
Consider buying me a coffee to help support this channel.
https://www.buymeacoffee.com/offroadfarm
Check out these torque wrenches from Tekton.
3/8 Torque wrench
https://amzn.to/2P4cj1t
1/2 Torque wrench
https://amzn.to/3eSIjR2
Follow me on Facebook @offroadfarm
Follow me on Instagram @offroadfarm
As an Amazon Associate I earn from qualifying purchases.
Consider buying me a coffee to help support this channel.
https://www.buymeacoffee.com/offroadfarm
Check out these torque wrenches from Tekton.
3/8 Torque wrench
https://amzn.to/2P4cj1t
1/2 Torque wrench
https://amzn.to/3eSIjR2
Follow me on Facebook @offroadfarm
Follow me on Instagram @offroadfarm
As an Amazon Associate I earn from qualifying purchases.
3 سال پیش
در تاریخ 1399/12/28 منتشر شده
است.
15,266
بـار بازدید شده