Dynamic Milling 6061 Aluminum with an Indexable Helical Roughing End Mill - Volume Milling Demo
59.3 هزار بار بازدید -
6 سال پیش
-
Dynamic milling (volume milling) 6061
Dynamic milling (volume milling) 6061 aluminum with an American-made DAPRA helical roughing end mill.
Dynamic/volume milling is a very efficient way to remove material quickly, providing high metal removal rates, shorter cycle times, and prolonged tool life. Expensive solid carbide end mills are often used, but indexable tooling like Dapra's HREM can often tackle the job at a fraction of the cost.
Tool: 3/4" Helical End Mill (HREM0750)
2 flutes, 6 inserts total, .900" max. Depth of Cut (DOC)
Material: 6061 aluminum - 6" x 8"
Pocketing routing parameters:
.900" Depth of Cut
10,000 RPM
500 IPM Programmed Feed Rate
15% (.113") Width of Cut (WOC)
Total cycle time = 5.5 minutes
For more information or a free application review, please visit https://www.dapra.com or call us at 1-800-243-3344.
#YourJobOurJob
Dynamic/volume milling is a very efficient way to remove material quickly, providing high metal removal rates, shorter cycle times, and prolonged tool life. Expensive solid carbide end mills are often used, but indexable tooling like Dapra's HREM can often tackle the job at a fraction of the cost.
Tool: 3/4" Helical End Mill (HREM0750)
2 flutes, 6 inserts total, .900" max. Depth of Cut (DOC)
Material: 6061 aluminum - 6" x 8"
Pocketing routing parameters:
.900" Depth of Cut
10,000 RPM
500 IPM Programmed Feed Rate
15% (.113") Width of Cut (WOC)
Total cycle time = 5.5 minutes
For more information or a free application review, please visit https://www.dapra.com or call us at 1-800-243-3344.
#YourJobOurJob
6 سال پیش
در تاریخ 1398/01/14 منتشر شده
است.
59,319
بـار بازدید شده