How to change the drive belt / transmission belt on a John Deere S130 & other 100 Series mowers

Mechanical Mind
Mechanical Mind
47.4 هزار بار بازدید - 2 سال پیش - In this video I show
In this video I show you how to change the drive belt on a John Deere S130. It will be very similar to all the other John Deere 100 series mowers as well as many other mower brands.

Tools needs:
16mm socket
15mm socket
19mm or 3/4" socket
15mm wrench.
Impact-  used in video:12v DeWalt DCF 920

You'll need to remove the deck like I've shown in other videos. Then jack the front end up and secure it with either jack stands wheel ramps or in this video I'm using spare Wheels. You also want to make sure the mower cannot move even when you take the e-brake off.

when you go to reinstall the clutch take special note to line up the key way that's inside of the clutch and pulley with the slot on the engine crankshaft. Also while you slide it up make sure the belt does not get in a bind or on the outside of the belt guides around the crank pulley.

I hope this video helps you guys out and makes the job easier for you.  Please like subscribe and feel free to comment if you have any questions. I will do my best to answer everyone.
2 سال پیش در تاریخ 1401/04/11 منتشر شده است.
47,442 بـار بازدید شده
... بیشتر