Jigsaw Cube

OskarPuzzle
OskarPuzzle
7.4 هزار بار بازدید - 6 سال پیش - More OskarPuzzle at
More OskarPuzzle at https://www.youtube.com/OskarPuzzle?s.... Buy at https://i.materialise.com/en/shop/ite... or at https://www.shapeways.com/product/Z72.... Jigsaw Cube is a design that was requested by George Miller. George wanted a puzzle that looks like the classic jigsaw-cube picture from the internet, but then as a real, actual puzzle. Also, the puzzle should be hollow, so it could be used as a box. All parts slide at a 45-degrees angle. To solve the puzzle, first the top half needs to be slid from the bottom half. Then each half is split into two quarters. Finally, the four quarters are each split into two parts. So there is a total of eight parts. Needless to say, this puzzle is fairly easy to solve for anyone with a bit of 3D insight.

Several YouTubers had commented that they want to see more cube puzzles on the OskarPuzzle YouTube channel. This cube should satisfy their needs for a while.

Copyright (c) 2018, M. Oskar van Deventer.

Frequently Asked Question: http://oskarvandeventer.nl/FAQ.html
Buy mass-produced Oskar puzzles at http://www.puzzlemaster.ca/browse/oskar/ (USA, CA) and http://www.sloyd.fi/oskar-deventer-c-... (EU)
Buy exclusive 3D-printed Oskar puzzles at  http://shapeways.com/shops/oskarpuzzles and https://i.materialise.com/shop/design...
6 سال پیش در تاریخ 1397/06/17 منتشر شده است.
7,478 بـار بازدید شده
... بیشتر