How To: Add an Automatic Water Drain to your Air Compressor
13.5 هزار بار بازدید -
4 سال پیش
-
This video lists everything needed
This video lists everything needed to wire in an automatic water drain for a 1PH 220V air compressor. I've attempted to give links to every part in the video, below, however, some parts are only feasible to purchase locally.
Parts List:
ASCO Red Hat Solenoid Valve: www.kleen-ritecorp.com/p-17457-asco-1-4-brass-norm…
Omron Time-Delay Controller: www.ebay.com/itm/OMRON-NEW-H3Y-2-AC220V-5S-PLC-DPD…
Fork Terminals: amzn.to/2JKEkIC
Wire Nuts: amzn.to/2L73aDt
18ga Wire: amzn.to/2Vx3ahM
10ga Stranded Wire: See your local electrician or hardware store
Blue Flex ENT Conduit: amzn.to/3oiaLNN
Blue Flex ENT Conduit Ends (This one is ridiculously overpriced, but you can use the description to get one at your hardware store): amzn.to/36CrUvy
Junction/Gang Box: $3 at your hardware store
Gang Box Connectors: amzn.to/2JyDYVV
1/2" Steel Flex Conduit (sold by the foot at some hardware stores): amzn.to/39EpU7W
1/4" NPT Male-to-Male: amzn.to/33GMyce
1/4" Push-Lok Connector (the plastic ones at the hardware store are much cheaper): amzn.to/2Vyre3V
1/4" Clear Poly Drain Tube: $5 at your local hardware store
Heat Shrink: amzn.to/37ykFE7
Butt-Connectors: amzn.to/2KZNNMR
DIN Rail: amzn.to/3qp6kT6
My Amazon Associate links help me to pay for the labor of creating these videos. Your support is greatly appreciated!
4 سال پیش
در تاریخ 1399/09/13 منتشر شده
است.
13,555
بـار بازدید شده