Ceramic Coating Car - How To Apply Ceramic Coating Spray
71.7 هزار بار بازدید -
5 سال پیش
-
Wondering how to apply a
Wondering how to apply a ceramic coating to your car?
In this video Dan Sweeney walks you through the proper steps for applying a spray-on ceramic coating to your car.
You can purchase Ceramic Spray here:
https://shop.torquedetail.com/ceramic...
1). Decontaminate Your Car's Surface
Remove the layer of dirt and contaminants from your car's surface. Sometimes this isn't visible to the naked eye.
Ceramic Shine™ is most effective when it bonds to the car's "clear coat". It's unable to do this if there is dirt and grime sitting atop the clear coat.
Use a polish or decontaminate "Decon" wash to clean your car's surface. To remove deep contaminants, we recommend "claying" your car as well.
We use a Clay Lubricant and a Clay Block. We prefer the Clay Block, as it's easier and faster than a traditional Clay Bar. But using a Clay Bar is fine as well.
2). Shake Bottle Thoroughly Before Using
3). Make Sure Surface Is Cool and Dry
4). Spray a Small Amount of Ceramic Spray onto your surface. Less Is More.
5). Use a Clean Microfiber Towel to Work Into Surface.
6). Use a 2nd Clean Microfiber Towel to Buff Into Surface Until Desired Polish Is Reached.
7). Apply To One Section at a Time.
8). Let Coating "Cure" for 6-12 Hours in a Cool, Dry, Covered Area
9). Continue To Reapply as Needed. This Will Ensure Your Surface Stays Coated and Doesn't Need to be Washed and Waxed again!
Read about How to Apply here:
https://www.torquedetail.com/pages/ho...
In this video Dan Sweeney walks you through the proper steps for applying a spray-on ceramic coating to your car.
You can purchase Ceramic Spray here:
https://shop.torquedetail.com/ceramic...
1). Decontaminate Your Car's Surface
Remove the layer of dirt and contaminants from your car's surface. Sometimes this isn't visible to the naked eye.
Ceramic Shine™ is most effective when it bonds to the car's "clear coat". It's unable to do this if there is dirt and grime sitting atop the clear coat.
Use a polish or decontaminate "Decon" wash to clean your car's surface. To remove deep contaminants, we recommend "claying" your car as well.
We use a Clay Lubricant and a Clay Block. We prefer the Clay Block, as it's easier and faster than a traditional Clay Bar. But using a Clay Bar is fine as well.
2). Shake Bottle Thoroughly Before Using
3). Make Sure Surface Is Cool and Dry
4). Spray a Small Amount of Ceramic Spray onto your surface. Less Is More.
5). Use a Clean Microfiber Towel to Work Into Surface.
6). Use a 2nd Clean Microfiber Towel to Buff Into Surface Until Desired Polish Is Reached.
7). Apply To One Section at a Time.
8). Let Coating "Cure" for 6-12 Hours in a Cool, Dry, Covered Area
9). Continue To Reapply as Needed. This Will Ensure Your Surface Stays Coated and Doesn't Need to be Washed and Waxed again!
Read about How to Apply here:
https://www.torquedetail.com/pages/ho...
5 سال پیش
در تاریخ 1398/08/07 منتشر شده
است.
71,732
بـار بازدید شده