[100% Fix]: Error Message- DHCP Is Not Enabled For Ethernet
26 بار بازدید -
11 ماه پیش
-
Are you getting the following
Are you getting the following error message in Windows 10 or Windows 11:-
“DHCP is not enabled for “Ethernet”
In this tutorial, I have explained some easiest points which can resolve this error.
Steps to follow are as follows:
1. Change adapter settings from Network and Sharing Center
2. Enable DHCP Client Service
3. Reset Network Configuration from Command Prompt using these two commands:
ipconfig /flushdns
ipconfig /renew
4. Reset Router
#DHCP #networksettings #Windows10 #windows11
“DHCP is not enabled for “Ethernet”
In this tutorial, I have explained some easiest points which can resolve this error.
Steps to follow are as follows:
1. Change adapter settings from Network and Sharing Center
2. Enable DHCP Client Service
3. Reset Network Configuration from Command Prompt using these two commands:
ipconfig /flushdns
ipconfig /renew
4. Reset Router
#DHCP #networksettings #Windows10 #windows11
11 ماه پیش
در تاریخ 1402/05/24 منتشر شده
است.
26
بـار بازدید شده