Our Experience With The W7152 Ingersoll Rand 1/2" Impact Wrench 1,500 ft-lbs Nut Busting
124 هزار بار بازدید -
6 سال پیش
-
Take a look at the
Take a look at the new Ingersoll Rand W7152 1/2" 20-volt Impact Wrench. This is similar to but larger than the W5132 and W5152 mid-torque impact wrenches. The W7152 delivers 1,500 foot-pounds of nut-busting torque and 1,000 foot-pounds of max
reverse torque. The W7152 is a compact 8.1" long from tip to tail and has a 360-degree shadowless task light to provide exceptional access and increased visibility in hard-to-reach spaces.
The Ingersoll Rand IQV power control system gives users the power they want and the control they need to complete jobs accurately and quickly.
The W7152 has four power and control settings. Each setting operates at maximum reverse torque, so users don't need to switch settings to remove a stubborn fastener.
The four power modes in forward control include:
- Max Power: The max power setting delivers up to 1,000 foot-pounds of max torque.
- Half Power: The half power setting tightens fasteners at up to 530 foot-pounds of torque for applications that don’t require maximum torque speeds.
- Wrench Tight: Instead of changing to a hand wrench, users can use the wrench tight setting to pre-tighten bolts at 35-110 foot-pounds of torque. In this setting, the tool automatically shuts off, so bolts are not over-torqued on parts such as lug nuts and suspension bolts.
- Hand Tight: The hand tight setting turns slowly, creating a snug fit to start a lug bolt to hold a wheel in place. The hand tight mode also secures parts such as hubcap cover bolts, splash shields, oil pans or timing covers. When the tool reaches the point of impact, it also shuts off to avoid over-torqued fasteners.
reverse torque. The W7152 is a compact 8.1" long from tip to tail and has a 360-degree shadowless task light to provide exceptional access and increased visibility in hard-to-reach spaces.
The Ingersoll Rand IQV power control system gives users the power they want and the control they need to complete jobs accurately and quickly.
The W7152 has four power and control settings. Each setting operates at maximum reverse torque, so users don't need to switch settings to remove a stubborn fastener.
The four power modes in forward control include:
- Max Power: The max power setting delivers up to 1,000 foot-pounds of max torque.
- Half Power: The half power setting tightens fasteners at up to 530 foot-pounds of torque for applications that don’t require maximum torque speeds.
- Wrench Tight: Instead of changing to a hand wrench, users can use the wrench tight setting to pre-tighten bolts at 35-110 foot-pounds of torque. In this setting, the tool automatically shuts off, so bolts are not over-torqued on parts such as lug nuts and suspension bolts.
- Hand Tight: The hand tight setting turns slowly, creating a snug fit to start a lug bolt to hold a wheel in place. The hand tight mode also secures parts such as hubcap cover bolts, splash shields, oil pans or timing covers. When the tool reaches the point of impact, it also shuts off to avoid over-torqued fasteners.
6 سال پیش
در تاریخ 1397/06/31 منتشر شده
است.
124,041
بـار بازدید شده